The Cabernet 'B&W' features an intricate barrel in black & white ebony wood, and a light inner structure of brass. The accents on the carbon fiber cap are in mokume, carbon fiber, and hand-forged damascus. The pocket clip is set with a citrine gemstone. This writing instrument also features William Henry's patent-pending Wavelock™ cap closure system.

Materials

• Hand-forged damascus
• Mokume gane
• Titanium
• Black & White Ebony
• Carbon Fiber
• Citrine

Features & Specs

• Wavelock™ Closure System
• Shipped in an elegant wood presentation box

Number in Edition: 100

The C15 Molokai features premium Curly Koa wood from the namesake Hawaiian islands, set into a lightweight yet durable titanium frame. The blade hand-forged 'Ripple' damascus steel by Chad Nichols. Fittings are tempered stainless, titanium, sterling silver and inlaid smoky quartz in 18K bezels. Wear it and use it well...

Materials

• Curly Koa
• Hand-forged damascus
• Smoky Quartz
• Titanium

Features & Specs

• One-hand button lock system
• Leather carrying case
• Shipped in an elegant wood presentation box
• Dimensions: 
\r\n

Blade 3.88" (98.5mm)
Handle 4.63" (117.6mm)
Overall open 7.75" (196.8mm)

Number in Edition: 25

The Gentac ‘Blue Flash’ features a light and resilient frame in anodized blue, aerospace-grade titanium inlaid with carbon fiber, and a titanium pocket clip. The blade is 'Jet Stream' damascus by Chad Nichols; the one-hand button lock and the thumb stud are set with spinel gemstones.

Materials

• Hand-forged damascus
• Titanium
• Carbon Fiber
• Spinel

Features & Specs

• One-hand button lock system
• Stainless Steel pocket clip
• Shipped in an elegant wood presentation box
• Dimensions: 

Blade 3.25" (82.5mm)
Handle 3.80" (96.5mm)
Overall open 7.00" (177.8mm)

Number in Edition: 50

The Gentac ‘Green Hornet’ features a light and resilient frame in aerospace grade titanium that has been blast-polished, then inlaid with a metal-infused resin. The stunning ‘Hornets Nest’ damascus blade was forged by master damascus forger Mike Norris, and as a thoughtful finishing touch, the one-hand button lock and the thumb stud have been set with fine spinel gemstones. 

Materials

• Hand-forged damascus
• Titanium
• Acrylic
• Spinel

Features & Specs

• One-hand button lock system
• Shipped in an elegant wood presentation box
• Dimensions: 

Blade 3.25" (82.5mm)
Handle 3.80" (96.5mm)
Overall open 7.00" (177.8mm)

Number in Edition: 50

The 'Departure' is a bold bronze pendant, finely cast with timeless skull symbols, featuring a state-of-the-art blade made from 'Intrepid' damascus steel, hand-forged by Chad Nichols. A spinel gemstone conceals William Henry’s button lock, ensuring that the blade is securely locked both open and closed, for safe wear and carry. The 'Departure' comes on a PVD black-coated bronze chain with a sterling clasp. A sterling silver quick release clasp allows you to take the knife off the chain for use, or to attach the knife to a keychain.

Materials

• Hand-forged damascus
• Sculpted Bronze
• Spinel

Features & Specs

• Safe button lock system
• Dimensions: 

Blade 1.60" (40.64mm)
Handle 2.25" (56.0mm)
Overall open 3.80" (96.52mm)

Number in Edition:

The Kestrel 'Blush' features a light and resilient frame in aerospace grade titanium, inlaid with Zinc Matrix apple coral. The blade is hand-forged 'Hornets Nest' damascus by Mike Norris; the one-hand button lock and the thumb stud are set with white topaz gemstones.

Materials

• Hand-forged damascus
• Titanium
• Zinc Matrix apple coral
• White Topaz

Features & Specs

• One-hand button lock system
• Leather carrying case
• Shipped in an elegant wood presentation box
• Dimensions: 

Blade 2.13" (54.1mm)
Handle 2.88" (73.1mm)
Overall open 5.00" (127mm)

Number in Edition: 50

The Monarch 'Red Star' features a sleek frame in aerospace grade titanium inlaid with 'Red Burl' Dichrolam®. The blade is hand-forged 'Intrepid' damascus by Chad Nichols. The one-hand button lock and the thumb stud are set with spinel gemstones.

Materials

• Hand-forged damascus
• Titanium
• Dichrolam®
• Spinel

Features & Specs

One-hand button lock system
Leather carrying case
Shipped in an elegant wood presentation box

Dimensions: 

• Blade 2.63" (66.8mm)
• Handle 3.58" (90.9mm)
• Overall open 6.00" (152.4mm)

Number in Edition: 50

The Kestrel 'Cranium' features a light and resilient frame in aerospace grade titanium, inlaid with hand-carved sterling silver by Lee Downey. The blade is hand-forged 'Boomerang' damascus by Chad Nichols; the one-hand button lock and the thumb stud are set with spinel gemstones.

Materials

• Hand-forged damascus
• Carved Sterling Silver
• Titanium
• Spinel

Features & Specs

• One-hand button lock system
• Leather carrying case
• Shipped in an elegant wood presentation box
• Dimensions: 

Blade 2.13" (54.1mm)
Handle 2.88" (73.1mm)
Overall open 5.00" (127mm)

Number in Edition: 35

The Monarch ‘Blue Hills' features a beautiful frame in aerospace grade Titanium, inlaid with mini pine cones in resin. The blade is hand-forged 'Raindrop' damascus by Mike Norris; the one-hand button lock and the thumb stud are set with Kashmir Blue topaz gemstones.

Materials

• Hand-forged damascus
• Titanium
• Kashmir Blue Topaz

Features & Specs

One-hand button lock system
Leather carrying case
Shipped in an elegant wood presentation box

Dimensions: 

• Blade 2.63" (66.8mm)
• Handle 3.58" (90.9mm)
• Overall open 6.00" (152.4mm)

Number in Edition: 250

The Ventana ‘Golden Eye’ features a frame in 'Twist' mokume gane, inlaid with a beautiful piece of gold lip pearl. The blade is hand-forged 'Typhoon' damascus by Devin Thomas; the one-hand button lock is set with ruby.

Materials

• Hand-forged damascus
• Koftgari
• Abalone
• Amethyst

Features & Specs

• One hand button lock
• Leather carrying case
• Shipped in an elegant wood presentation box
• Dimensions: 

Blade 2.50" (63.5mm)
Handle 3.13" (79.5mm)
Overall open 5.60" (142.2mm)

Number in Edition: 50

The Spearpoint ‘Copper Butte’ features a light and resilient frame in aerospace grade titanium, inlaid with a beautiful piece of desert ironwood (ond of the hardest woods on Earth). The blade is hand-forged 'Hornet's Nest' damascus by Mike Norris; the one-hand button lock and the thumb stud are set with citrine.

Materials

• Hand-forged damascus
• Titanium
• Desert Ironwood
• Citrine

Features & Specs

One-hand button lock system

Dimensions: 

Blade 3.06" (77.7mm)
Handle 4.13" (104.9.5mm)
Overall open 7.19" (182.6mm)

All William Henry knives feature a unique serial number which is engraved into the blade to assure the authenticity and lifetime traceability of the product

This knife is shipped in an elegant wood presentation box, and it comes with a pocket clipcase made from soft, high-grade leather, with an integrated stainless steel pocket clip

Number in Edition: 500

The Monarch 'Red Storm' features a light and resilient frame in aerospace grade titanium, which is finished with a fine blast-polishing. The unique inlay featured on this knife is crafted from a stabilized Blue Spruce Pinecone which exhibits beautiful natural variance with each cut of the material. The blade is hand-forged 'Intrepid' damascus by Chad Nichols. The one-hand button lock and the thumb stud are set with garnet gemstones.

Materials

• Garnet
• Hand-forged damascus
• Spruce Pine Cone
• Titanium

Features & Specs

One-hand button lock system
Leather carrying case
Shipped in an elegant wood presentation box

Dimensions: 

• Blade 2.63" (66.8mm)
• Handle 3.58" (90.9mm)
• Overall open 6.00" (152.4mm)

Number in Edition: 100

The Gentac ‘Outback’ features a light and resilient frame in aerospace grade titanium that has been blast-polished, then inlaid with beautiful scales of desert ironwood– one of the hardest woods on Earth. The stunning 'Boomerang' damascus blade was forged by master damascus forger Chad Nichols, and as a thoughtful finishing touch, the one-hand button lock and the thumb stud have been set with fine Spinel gemstones. An outstanding William Henry creation.

Materials

• Hand-forged damascus
• Titanium
• Desert Ironwood
• Spinel

Features & Specs

One-hand button lock system

Dimensions: 

Blade 3.25" (82.5mm)
Handle 3.80" (96.5mm)
Overall open 7.00" (177.8mm)

All William Henry knives feature a unique serial number which is engraved into the blade to assure the authenticity and lifetime traceability of the product

This knife is shipped in an elegant wood presentation box, and it comes with a pocket clipcase made from soft, high-grade leather, with an integrated stainless steel pocket clip

Number in Edition: 250

The Monarch 'Verano'' features a beautiful frame in 'Raindrop' mokume gane by Mike Sakmar, and titanium pocket clip. The blade is hand-forged 'Typhoon' damascus by Rob Thomas; the one-hand button lock and the thumb stud are set with smoky quartz.

Materials

• Hand-forged damascus
• Mokume gane
• Smoky Quartz

Features & Specs

One-hand button lock system
Leather carrying case
Shipped in an elegant wood presentation box

Dimensions: 

• Blade 2.63" (66.8mm)
• Handle 3.58" (90.9mm)
• Overall open 6.00" (152.4mm)

Number in Edition: 100

The Monarch ‘Teal' features a light and resilient frame which is machined from aerospace grade titanium, then finished with a fine blast-polishing. The inlay is crafted from a teal dyed maple burl with outstanding natural variance. The blade is crafted from  hand-forged 'Raindrop' damascus by Mike Norris, who is one of the best damascus artists in the US. The one-hand button lock and the thumb stud are set with London blue topaz gemstones.

Materials

• Hand-forged damascus
• Titanium

Features & Specs

One-hand button lock system
Leather carrying case
Shipped in an elegant wood presentation box

Dimensions: 

• Blade 2.63" (66.8mm)
• Handle 3.58" (90.9mm)
• Overall open 6.00" (152.4mm)

Number in Edition: 50

The Lancet 'Kingsbury' features a beautiful frame in 'Tiger Stripe' Mokume Gane, with a strong pocket clip in aerospace grade titanium. The blade is hand-forged 'Hornet's Nest' damascus by Mike Norris; the one-hand button lock and the thumb stud are set with smoky quartz.

Materials

• Hand-forged damascus
• Tiger Stripe Mokume Gane
• Smoky Quartz

Features & Specs

• One-hand button lock system
• Titanium pocket clip
• Shipped in an elegant wood presentation box
• Dimensions: 

Blade 2.75" (69.9mm)
Handle 3.63" (92.2mm)
Overall open 6.38" (162mm)

Number in Edition: 50

The Lancet 'Black Palm' features a light and resilient frame in aerospace grade titanium, inlaid with black palm wood. The blade is hand-forged 'Intrepid' damascus by Chad Nichols; the one-hand button lock and the thumb stud are set with black onyx gemstones.

Materials

• Black Onyx
• Black Palm
• Hand-forged damascus
• Titanium

Features & Specs

• One-hand button lock system
• Leather carrying case
• Shipped in an elegant wood presentation box
• Dimensions: 

Blade 2.75" (69.9mm)
Handle 3.63" (92.2mm)
Overall open 6.38" (162mm)

Number in Edition: 100

The Lancet 'Endure' features a light and resilient bolster in aerospace grade titanium, and scale in carbon fiber. The blade is hand-forged 'Intrepid' damascus by Chad Nichols; the one-hand button lock and the thumb stud are set with black onyx gemstones.

Materials

• Black Onyx
• Carbon Fiber
• Hand-forged damascus
• Titanium
• Wave Damascus

Features & Specs

• One-hand button lock system
• Leather carrying case
• Shipped in an elegant wood presentation box
• Dimensions: 

Blade 2.75" (69.9mm)
Handle 3.63" (92.2mm)
Overall open 6.38" (162mm)

Number in Edition: 250

The Kestrel 'Glow' features a light and resilient frame in aerospace grade titanium, inlaid with Zinc Matrix apple coral. The blade is hand-forged 'Boomerang' damascus by Chad Nichols; the one-hand button lock and the thumb stud are set with white topaz gemstones.

Materials

• Hand-forged damascus
• Titanium
• Zinc Matrix apple coral
• White Topaz

Features & Specs

• One-hand button lock system
• Leather carrying case
• Shipped in an elegant wood presentation box
• Dimensions: 

Blade 2.13" (54.1mm)
Handle 2.88" (73.1mm)
Overall open 5.00" (127mm)

Number in Edition: 250

The Kestrel 'Blueray' features a beautiful frame in heat-blued damascus steel, inlaid with carbon fiber. The blade is hand-forged 'Hornets Nest' damascus by Mike Norris; the one-hand button lock and the thumb stud are set with sapphires.

Materials

• Hand-forged damascus
• Heat-colored damascus
• Carbon Fiber
• Sapphire

Features & Specs

• One-hand button lock system
• Leather carrying case
• Shipped in an elegant wood presentation box
• Dimensions: 

Blade 2.13" (54.1mm)
Handle 2.88" (73.1mm)
Overall open 5.00" (127mm)

Number in Edition: 100

The Lancet 'Black & Blue' is an Exclusive Edition featuring a beautiful frame in aerospace grade Titanium, inlaid with stabilized Blue Spruce Pinecone. The blade is black DLC-coated, hand-forged 'Hornets Nest' damascus by Mike Norris; the one-hand button lock and the thumb stud, and lanyard beads, are set with sapphires.

Materials

• Hand-forged damascus
• Titanium
• Spruce Pine Cone
• Sapphire

Features & Specs

• One-hand button lock system
• Leather carrying case
• Shipped in an elegant wood presentation box
• Dimensions: 

Blade 2.75" (69.9mm)
Handle 3.63" (92.2mm)
Overall open 6.38" (162mm)

Number in Edition: 18

The Morpheus 'Flash' belongs equally on your neck as a pendant, in your pocket as a keychain knife, or on display as a beautiful piece of functional art. The blade is crafted using hand-forged 'Intrepid' damascus steel by Chad Nichols, and the handle is crafted from aerospace-grade titanium inlaid with Black Sea Dichrolam®. This fine knife also features a spinel gemstone and black PVD coated bronze chain. A fine, functional, and timeless William Henry creation.

Materials

• Dichrolam®
• Hand-forged damascus
• Spinel
• Titanium

Features & Specs

• Safe button lock system
• Dimensions: 

Blade 1.60" (40.64mm)
Handle 2.25" (56.0mm)
Overall open 3.80" (96.52mm)

Number in Edition:

The Lancet 'Orange Sunset' features a beautiful frame in aerospace grade Titanium, inlaid with orange spalted beech wood. The blade is hand-forged 'Hornets Nest' damascus by Chad Nichols. The one-hand button lock and thumbstud are set with black onyx gemstones.

Materials

• Beech Wood
• Black Onyx
• Hand-forged damascus
• Titanium

Features & Specs

• One-hand button lock system
• Leather carrying case
• Shipped in an elegant wood presentation box
• Dimensions: 

Blade 2.75" (69.9mm)
Handle 3.63" (92.2mm)
Overall open 6.38" (162mm)

Number in Edition: 25

The Kestrel 'Palm Desert' features a beautiful frame in 'Raindrop' Mokume Gane by Mike Sakmar, inlaid with black palm wood. The blade is hand-forged 'Raindrop' damascus by Mike Norris; the one-hand button lock and the thumb stud are set with sapphires.

Materials

• Hand-forged damascus
• Mokume gane
• Black Palm
• Sapphire

Features & Specs

• One-hand button lock system
• Leather carrying case
• Shipped in an elegant wood presentation box
• Dimensions: 

Blade 2.13" (54.1mm)
Handle 2.88" (73.1mm)
Overall open 5.00" (127mm)

Number in Edition: 50

The Lancet 'Rockledge' features a light and resilient frame in aerospace grade titanium, inlaid with desert ironwood. The blade is hand-forged 'Intrepid' damascus by Chad Nichols; the one-hand button lock and the thumb stud are set with Onyx gemstones.

Materials

• Desert Ironwood
• Hand-forged damascus
• Iolite
• Titanium

Features & Specs

• One-hand button lock system
• Leather carrying case
• Shipped in an elegant wood presentation box
• Dimensions: 

Blade 2.75" (69.9mm)
Handle 3.63" (92.2mm)
Overall open 6.38" (162mm)

Number in Edition: 250

The Lancet 'Yellow Beech' features a light and resilient frame in aerospace grade titanium, inlaid with yellow spalted beechwood. The blade is hand-forged 'Boomerang' damascus by Chad Nichols; the one-hand button lock and the thumb stud are set with smoky quartz gemstones.

Materials

• Beech Wood
• Hand-forged damascus
• Smoky Quartz
• Titanium

Features & Specs

Number in Edition: 50

The Lancet 'Fresh' features a light and resilient frame in aerospace grade titanium, inlaid with bocote wood. The blade is hand-forged 'Intrepid' damascus by Chad Nichols; the one-hand button lock and the thumb stud are set with smoky quartz gemstones.

Materials

• Bocote
• Hand-forged damascus
• Smoky Quartz
• Titanium

Features & Specs

Number in Edition: 100

The Zinfandel 5 features a full body in hand-forged, heat-blued damascus, titanium and ebonite. The accents are in mokume gane, and the pocket clip is set with sapphire. This pen also features our patent-pending Wavelock™ closure system.

Materials

• Hand-forged damascus
• Mokume gane
• Titanium
• Ebonite
• Sapphire

Features & Specs

• Wavelock™ Closure System
• Shipped in an elegant wood presentation box

Number in Edition: 250

The Monarch 'Granada' features a sleek frame in aerospace grade titanium inlaid with Cocobolo wood. The blade is hand-forged 'Boomerang' damascus by Chad Nichols. The one-hand button lock and the thumb stud are set with citrine gemstones.
The Monarch is a simple design that is easy on the eye and effortless in the hand; the elegant shape of the handle on this design is also an ideal canvas to showcase our exotic materials. The 'Granada' is the beautiful balance between elegance, function, modern and exotic materials.

Materials

• Citrine
• Cocobolo
• Hand-forged damascus
• Titanium

Features & Specs

One-hand button lock system
Leather carrying case
Shipped in an elegant wood presentation box

Dimensions: 

• Blade 2.63" (66.8mm)
• Handle 3.58" (90.9mm)
• Overall open 6.00" (152.4mm)

Number in Edition: 250

The Kestrel 'MCT' features a beautiful frame in 'Raindrop' Mokume Gane by Mike Sakmar, inlaid with carbon fiber. The blade is hand forged 'Typhoon' damascus by Rob Thomas; the one-hand button lock and the thumb stud are set with white topaz.

Materials

• Hand-forged damascus
• Mokume gane
• Carbon Fiber
• White Topaz

Features & Specs

• One-hand button lock system
• Leather carrying case
• Shipped in an elegant wood presentation box
• Dimensions: 

Blade 2.13" (54.1mm)
Handle 2.88" (73.1mm)
Overall open 5.00" (127mm)

Number in Edition: 500

The Monarch ‘Climb' features a beautiful frame in aerospace grade Titanium, inlaid with hand-forged 'Ladder' damascus by Mike Norris. The blade is hand-forged 'Boomerang' damascus by Chad Nichols; the one-hand button lock and the thumb stud are set with spinel gemstones.

Materials

• Hand-forged damascus
• Titanium
• Spinel

Features & Specs

One-hand button lock system
Leather carrying case
Shipped in an elegant wood presentation box

Dimensions: 

• Blade 2.63" (66.8mm)
• Handle 3.58" (90.9mm)
• Overall open 6.00" (152.4mm)

Number in Edition: 50

The Lancet 'Alpine' features a beautiful frame in heat-colored 'X-out' damascus by Chad Nichols, inlaid with silver twill G10. The blade is hand forged 'Dot Matrix' damascus by Rob Thomas; the one-hand button lock and the thumb stud are set with sapphires.

Materials

• Hand-forged damascus
• Heat-colored damascus
• Silver Twill G10
• Sapphire

Features & Specs

• One-hand button lock system
• Leather carrying case
• Shipped in an elegant wood presentation box
• Dimensions: 

Blade 2.75" (69.9mm)
Handle 3.63" (92.2mm)
Overall open 6.38" (162mm)

Number in Edition: 50

The Ventana ‘Tambora’ features a beautiful frame in 24K gold Koftgari, inlaid with a scale in carbon fiber. The blade is hand-forged 'Dot Matrix' damascus by Rob Thomas; the two-hand button lock is set with smoky quartz.

Materials

• Hand-forged damascus
• Koftgari
• Carbon Fiber
• Smoky Quartz

Features & Specs

• One hand button lock
• Leather carrying case
• Shipped in an elegant wood presentation box
• Dimensions: 

Blade 2.50" (63.5mm)
Handle 3.13" (79.5mm)
Overall open 5.60" (142.2mm)

Number in Edition: 25

The Kestrel 'Fire Storm' features a light and resilient frame in aerospace grade titanium, inlaid with Zinc Matrix apple coral. The blade is hand-forged 'Raindrop' damascus by Mike Norris; the one-hand button lock and the thumb stud are set with white topaz gemstones.

Materials

• Citrine
• Hand-forged damascus
• Titanium
• Zinc Matrix apple coral

Features & Specs

• One-hand button lock system
• Leather carrying case
• Shipped in an elegant wood presentation box
• Dimensions: 

Blade 2.13" (54.1mm)
Handle 2.88" (73.1mm)
Overall open 5.00" (127mm)

Number in Edition: 250

The Kestrel 'Raven' features a beautiful frame in 'Raindrop' Mokume Gane by Mike Sakmar, inlaid with a carbon fiber. The blade is hand forged 'Boomerang' damascus by Chad Nichols; the one-hand button lock and the thumb stud are set with spinel gemstones.

Materials

• Hand-forged damascus
• Mokume gane
• Carbon Fiber
• Spinel

Features & Specs

• One-hand button lock system
• Leather carrying case
• Shipped in an elegant wood presentation box
• Dimensions: 

Blade 2.13" (54.1mm)
Handle 2.88" (73.1mm)
Overall open 5.00" (127mm)

Number in Edition: 250

The Ventana ‘Stratify’ features a mesmerizing frame in 24K gold and sterling silver Koftgari (the ancient Indian technique of inlaying gold and sterling silver in tool-steel), inlaid with a striking scale in carbon fiber. The blade is hand-forged 'Herring Bone' damascus by Rob Thomas. The two-hand button lock is set with smoky quartz.

Materials

• Hand-forged damascus
• Carbon Fiber
• Smoky Quartz

Features & Specs

• Two hand button lock
• Leather carrying case
• Shipped in an elegant wood presentation box
• Dimensions: 

Blade 2.50" (63.5mm)
Handle 3.13" (79.5mm)
Overall open 5.60" (142.2mm)

Number in Edition: 250

The Kestrel 'Signature' features a beautiful frame in 'Twist' mokume gane by Mike Sakmar, inlaid with exotic and beautiful 'Signature Wood'. The blade is hand-forged 'Intrepid' damascus by Chad Nichols; the one-hand button lock and the thumb stud are set with smoky quartz gemstones.

Materials

• Hand-forged damascus
• Mokume gane
• Signature wood
• Smoky Quartz

Features & Specs

• One-hand button lock system
• Leather carrying case
• Shipped in an elegant wood presentation box
• Dimensions: 

Blade 2.13" (54.1mm)
Handle 2.88" (73.1mm)
Overall open 5.00" (127mm)

Number in Edition: 3

The Kestrel 'Devonshire' features a beautiful handle with 24K gold koftgari, and desert ironwood. The blade is hand-forged 'Hornets Nest' damascus by Mike Norris ; the one-hand button lock and the thumb stud are set with spessartite.

Materials

• Hand-forged damascus
• Koftgari
• Desert Ironwood
• Spessartite

Features & Specs

• One-hand button lock system
• Leather carrying case
• Shipped in an elegant wood presentation box
• Dimensions: 

Blade 2.13" (54.1mm)
Handle 2.88" (73.1mm)
Overall open 5.00" (127mm)

Number in Edition: 25

The Gentac 'Blue Note' features a beautiful frame in aerospace grade Titanium, inlaid with Black Sea Dichrolam®. The blade is hand-forged 'Typhoon' damascus by Rob Thomas; the one-hand button lock and the thumb stud are set with spinel gemstones.

Materials

• Hand-forged damascus
• Titanium
• Dichrolam®
• Spinel

Features & Specs

• One-hand button lock system
• Shipped in an elegant wood presentation box
• Dimensions: 

Blade 3.25" (82.5mm)
Handle 3.80" (96.5mm)
Overall open 7.00" (177.8mm)

Number in Edition: 50

The Kestrel 'Indigo' features a beautiful frame in hand-forged 'Rolling Rock' damascus by Chad Nichols, inlaid with Norway Blue Spruce pine cone. The blade is hand-forged 'Hornets Nest' damascus by Mike Norris; the one-hand button lock and the thumb stud are set with sapphire gemstones.

Materials

• Hand-forged damascus
• Spruce Pine Cone
• Sapphire

Features & Specs

• One-hand button lock system
• Dimensions: 

Blade 2.13" (54.1mm)
Handle 2.88" (73.1mm)
Overall open 5.00" (127mm)

All William Henry knives feature a unique serial number which is engraved into the blade to assure the authenticity and lifetime traceability of the product

This knife is shipped in an elegant wood presentation box, and it includes a pocket clipcase made from soft, high-grade leather, with an integrated stainless steel pocket clip

Number in Edition: 25

The 'Twilight' is a bold sterling silver pendant finely cast with timeless skull symbols, featuring a hidden, state-of-the-art blade made from 'intrepid' damascus steel, hand-forged by master forger Chad Nichols. A dramatic blazing red topaz conceals William Henry’s button lock ensuring that the blade is securely locked both open and closed, for safe wear and carry. A quick release clasp, also from sterling, allows you to take the knife off the cord for use, or to attach the knife to a keychain.

Materials

• Hand-forged damascus
• Sterling Silver
• Tactical paracord
• Blazing Red Topaz

Features & Specs

• Safe button lock system
• Includes sterling silver clasp and tactical cord necklace
• Dimensions: 

Blade 1.60" (40.64mm)
Handle 2.25" (56.0mm)
Overall open 3.80" (96.52mm)

Number in Edition:

The Ventana ‘Steinway’ features a beautiful frame in 24K gold Koftgari (the ancient Indian technique of inlaying gold in tool-steel), inlaid with piano key ivory. The blade is hand-forged 'Typhoon' damascus by Rob Thomas; the one-hand button lock is set with white topaz.

Materials

• Hand-forged damascus
• Koftgari
• Piano Key Ivory
• White Topaz

Features & Specs

• One hand button lock
• Leather carrying case
• Shipped in an elegant wood presentation box
• Dimensions: 

Blade 2.50" (63.5mm)
Handle 3.13" (79.5mm)
Overall open 5.60" (142.2mm)

Number in Edition: 50

The 'Kampos' features a frame in 'Raindrop' mokume gane, inlaid with 100,000 year-old fossil coral. The blade is hand-forged 'Jet Stream' damascus by Chad Nichols; the button lock and thumb stud are set with smokey quartz.

Materials

• Hand-forged damascus
• Mokume gane
• Fossil Coral
• Smoky Quartz

Features & Specs

• One-hand button lock system
• Leather carrying case
• Shipped in an elegant wood presentation box
• Dimensions: 

Blade 2.00" (50.8mm)
Handle 2.63" (66.8mm)
Overall open 4.63" (117.6mm)

Number in Edition: 25

The Kestrel 'Ridgecrest' features a beautiful frame in 'Raindrop' Mokume Gane by Mike Sakmar, inlaid with a desert ironwood (one of the hardest woods on earth). The blade is hand forged 'Raindrop' damascus by Mike Norris; the one-hand button lock and the thumb stud are set with citrines.

Materials

• Hand-forged damascus
• Mokume gane
• Desert Ironwood
• Citrine

Features & Specs

• One-hand button lock system
• Leather carrying case
• Shipped in an elegant wood presentation box
• Dimensions: 

Blade 2.13" (54.1mm)
Handle 2.88" (73.1mm)
Overall open 5.00" (127mm)

Number in Edition: 100

The 'Tudor' is a sterling silver pendant finely cast with an elegant 'diamond tuck' pattern, featuring a hidden, state-of-the-art blade made from 'Intrepid' damascus steel, hand-forged by master forger Chad Nichols from hundreds of layers of different steel alloys and folded into unique tapestries reminiscent of waves and flowing water. A ruby gemstone conceals William Henry’s button lock ensuring that the blade is securely locked both open and closed, for safe wear and carry.

Materials

• Hand-forged damascus
• Sterling Silver
• Ruby

Features & Specs

• Safe button lock system
• Includes sterling silver clasp and tactical cord necklace
• Dimensions: 

Blade 1.60" (40.64mm)
Handle 2.25" (56.0mm)
Overall open 3.80" (96.52mm)

Number in Edition:

The Kestrel 'Slice' features a beautiful frame in 'Twist' Mokume Gane by Mike Sakmar, inlaid with platon wood scales. The blade is hand forged 'Boomerang' damascus by Chad Nichols; the one-hand button lock and the thumb stud are set with smoky quartz gemstones.

Materials

• Hand-forged damascus
• Mokume gane
• Smoky Quartz

Features & Specs

• One-hand button lock system
• Leather carrying case
• Shipped in an elegant wood presentation box
• Dimensions: 

Blade 2.13" (54.1mm)
Handle 2.88" (73.1mm)
Overall open 5.00" (127mm)

Number in Edition: 3

This beautiful custom Kestrel features hand-engraved bolsters and mother of pearl scales with scrimshaw by Brian Hochstrat. The blade is hand-forged 'Hornets Nest' damascus by Mike Norris; the button lock and thumb stud are set with spinel gems.

Materials

• Hand-forged damascus
• Fine hand-engraving
• Sapphire

Features & Specs

• One-hand button lock system
• Leather carrying Clipcase™
• Shipped in an elegant wood presentation box
• Dimensions: 

Blade 2.13" (54.1mm)
Handle 2.88" (73.1mm)
Overall open 5.00" (127mm)

Number in Edition: 1

This elegant Pikatti folding knife features a frame in heat-blued 'Croc Skin' damascus by Chad Nichols, inlaid with beautiful gold lip pearl. The blade is hand-forged 'Dot Matrix' damascus by Rob Thomas; the button lock and thumb stud are set with sapphires.

Materials

• Hand-forged damascus
• Heat-colored damascus
• Goldlip Mother of Pearl
• Sapphire

Features & Specs

• One-hand button lock system
• Leather carrying case
• Shipped in an elegant wood presentation box
• Dimensions: 

Blade 2.00" (50.8mm)
Handle 2.63" (66.8mm)
Overall open 4.63" (117.6mm)

Number in Edition: 50

The Gentac ‘Mammut' features a light and resilient frame in aerospace grade titanium, inlaid with fossil mammoth bone. The blade is 'Dot Matrix' damascus by Rob Thomas; the one-hand button lock and the thumb stud are set with sapphires.

Materials

• Hand-forged damascus
• Titanium
• Fossil Mammoth Bone
• Sapphire

Features & Specs

• One-hand button lock system
• Shipped in an elegant wood presentation box
• Dimensions: 

Blade 3.25" (82.5mm)
Handle 3.80" (96.5mm)
Overall open 7.00" (177.8mm)

Number in Edition: 25

Materials

• Wave Damascus
• Hand-forged damascus
• Curly Koa
• Peridot

Features & Specs

• One-hand button lock system
• Leather carrying case
• Shipped in an elegant wood presentation box
• Dimensions: 

Blade 2.75" (69.9mm)
Handle 3.63" (92.2mm)
Overall open 6.38" (162mm)

Number in Edition: 15

The Spearpoint ‘Noble’ features a light and resilient frame in aerospace grade titanium, inlaid with 'Noble Brass' acrylic. The blade is hand-forged 'Intrepid' damascus by Chad Nichols; the one-hand button lock and the thumb stud are set with smoky quartz gemstones.

Materials

• Acrylic
• Hand-forged damascus
• Honey Topaz
• Titanium

Features & Specs

• One-hand button lock system
• Leather carrying case
• Shipped in an elegant wood presentation box
• Dimensions: 

Blade 3.06" (77.7mm)
Handle 4.13" (104.9.5mm)
Overall open 7.19" (182.6mm)

Number in Edition: 250

The Persian 'Dark Canyon' features a beautiful frame in etched 'Brain Wave' damascus by Chad Nichols, inlaid with cocobolo wood. The blade is 'Black Wave' damascus with an extra-strong core in ZDP-189. The one-hand button lock and the thumb stud are set with spinel gem stones.

Materials

• Hand-forged damascus
• Cocobolo
• Spinel

Features & Specs

One-hand button lock system

Dimensions: 

Blade 2.50" (63.5mm)
Handle 3.13" (79.5mm)
Overall open 5.60" (142mm)

All William Henry knives feature a unique serial number which is engraved into the blade to assure the authenticity and lifetime traceability of the product

This knife is shipped in an elegant wood presentation box, and it comes with a pocket clipcase made from soft, high-grade leather, with an integrated stainless steel pocket clip

Number in Edition: 25

The Ventana ‘WMPIHB’ features a beautiful frame in William Henry's 'Wave' Mokume Gane, inlaid with reclaimed piano key ivory. The blade is hand-forged 'Herring Bone' damascus by Rob Thomas. The two-hand button lock is set with citrine.

Materials

• Hand-forged damascus
• Wave Mokume
• Piano Key Ivory
• Citrine

Features & Specs

• Two hand button lock
• Leather carrying slip case
• Shipped in an elegant wood presentation box
• Dimensions: 

Blade 2.50" (63.5mm)
Handle 3.13" (79.5mm)
Overall open 5.60" (142.2mm)

Number in Edition: 500

The Pikatti 'Blue Sand' folding knife features a frame in hand-forged and heat-colored 'Twist' damascus by Chad Nichols, inlaid with bocote wood. The blade is hand-forged 'Hornets Nest' damascus by Mike Norris; the button lock and thumb stud are set with Kashmir blue topaz gemstones.

Materials

• Bocote
• Hand-forged damascus
• Heat-colored damascus
• Kashmir Blue Topaz

Features & Specs

• One-hand button lock system
• Leather carrying case
• Shipped in an elegant wood presentation box
• Dimensions: 

Blade 2.00" (50.8mm)
Handle 2.63" (66.8mm)
Overall open 4.63" (117.6mm)

Number in Edition: 20

The Kestrel 'Sand Storm' features a beautiful frame in William Henry's signature 'Wave' mokume, inlaid with a stunning piece of orange spalted beechwood. The blade is hand-forged 'Typhoon' damascus; the one-hand button lock and the thumb stud are set with citrine gemstones.

Materials

• Beech Wood
• Citrine
• Hand-forged damascus
• Wave Mokume

Features & Specs

• One-hand button lock system
• Leather carrying case
• Shipped in an elegant wood presentation box
• Dimensions: 

Blade 2.13" (54.1mm)
Handle 2.88" (73.1mm)
Overall open 5.00" (127mm)

Number in Edition: 100

The Gentac ‘Grey Ghost’ features a beautiful frame in 'Croc Skin' damascus by Chad Nichols, and titanium pocket clip. The blade is black tungsten DLC-coated ZDP-189 steel; the one-hand button lock and the thumb stud are set with spinel.

Materials

• Hand-forged damascus
• ZDP-189
• Spinel

Features & Specs

• One-hand button lock system
• Titanium pocket clip
• Shipped in an elegant wood presentation box
• Dimensions: 

Blade 3.25" (82.5mm)
Handle 3.80" (96.5mm)
Overall open 7.00" (177.8mm)

Number in Edition: 50

The Kestrel 'Python' features a beautiful frame in etched 'Rolling Rock' damascus by Chad Nichols, inlaid with stabilized tropical vine wood. The blade is black 'Wave' damascus with an extra strong core in ZDP-189; the one-hand button lock and the thumb stud are set with smoky quartz gemstones.

Materials

• Hand-forged damascus
• Tropical vine wood
• Smoky Quartz

Features & Specs

• One-hand button lock system
• Leather carrying case
• Shipped in an elegant wood presentation box
• Dimensions: 

Blade 2.13" (54.1mm)
Handle 2.88" (73.1mm)
Overall open 5.00" (127mm)

Number in Edition: 25

The Gentac 'Chaos' features a light and resilient frame in aerospace grade titanium that has been blast-polished, then inlaid with Red Burl Dichrolam®– a dynamic material composed of over nine different polymer layers laminated in three separate proprietary lamination steps. The stunning 'Intrepid' damascus blade is hand-forged by Chad Nichols, and as a thoughtful finishing touch, the one-hand button lock and the thumb stud have been set with fine citrine gemstones.

Materials

• Citrine
• Dichrolam®
• Hand-forged damascus
• Titanium

Features & Specs

• One-hand button lock system
• Shipped in an elegant wood presentation box
• Dimensions: 

Blade 3.25" (82.5mm)
Handle 3.80" (96.5mm)
Overall open 7.00" (177.8mm)

Number in Edition: 250

The Kestrel 'Tropics' features a beautiful frame in hand-forged Mokume Gane, inlaid with cocobolo wood. The blade is hand forged 'Raindrop' damascus by Mike Norris; the one-hand button lock and the thumb stud are set with smoky quartz.

Materials

• Cocobolo
• Hand-forged damascus
• Mokume gane
• Smoky Quartz

Features & Specs

• One-hand button lock system
• Leather carrying case
• Shipped in an elegant wood presentation box
• Dimensions: 

Blade 2.13" (54.1mm)
Handle 2.88" (73.1mm)
Overall open 5.00" (127mm)

Number in Edition: 25

The Lancet 'Burnt Ridge' features a beautiful frame in heat-blued damascus by Chad Nichols, and desert ironwood scale. The blade is William Henry's 'Wave' damascus with ZDP-189 core; the one-hand button lock and the thumb stud are set with spessartite.

Materials

• Wave Damascus
• Hand-forged damascus
• Desert Ironwood
• Spessartite

Features & Specs

• One-hand button lock system
• Leather carrying case
• Shipped in an elegant wood presentation box
• Dimensions: 

Blade 2.75" (69.9mm)
Handle 3.63" (92.2mm)
Overall open 6.38" (162mm)

Number in Edition: 50

The Monarch 'MCT' features an elegant frame in 'Raindrop' Mokume Gane by Mike Sakmar, inlaid with a beautiful scale in Carbon Fiber. The blade is hand-forged 'typhoon' damascus steel by Rob Thomas. The one-hand button lock and the thumb stud are set with White Topaz.

Materials

• Hand-forged damascus
• Mokume gane
• Carbon Fiber
• White Topaz

Features & Specs

One-hand button lock system
Leather carrying case
Shipped in an elegant wood presentation box

Dimensions: 

• Blade 2.63" (66.8mm)
• Handle 3.58" (90.9mm)
• Overall open 6.00" (152.4mm)

Number in Edition: 500

The Monarch 'Shale' features a beautiful frame in hand-forged 'Croc Skin' damascus by Chad Nichols. The blade is 'Wave' damascus with an extra-hard core of ZDP-189. The one-hand button lock and the thumb stud are set with sapphire gemstones.

Materials

• Wave Damascus
• Hand-forged damascus
• Heat-colored damascus
• Sapphire

Features & Specs

One-hand button lock system
Leather carrying case
Shipped in an elegant wood presentation box

Dimensions: 

• Blade 2.63" (66.8mm)
• Handle 3.58" (90.9mm)
• Overall open 6.00" (152.4mm)

Number in Edition: 5

The Monarch 'Orvis IV' features a beautiful frame in hand-forged 'Rolling Rock' damascus by Chad Nichols, inlaid with desert ironwood. The blade is hand-forged 'Hornets Nest' damascus by Mike Norris. The one-hand button lock and the thumb stud are set with citrines.

Materials

• Citrine
• Desert Ironwood
• Etched damascus
• Hand-forged damascus

Features & Specs

One-hand button lock system
Leather carrying case
Shipped in an elegant wood presentation box

Dimensions: 

• Blade 2.63" (66.8mm)
• Handle 3.58" (90.9mm)
• Overall open 6.00" (152.4mm)

Number in Edition: 50

The Kestrel 'Jigsaw' features a beautiful frame in Wave Mokume, inlaid with dyed European Sycamore wood. The blade is hand forged 'Intrepid' damascus by Chad Nichols; the one-hand button lock and the thumb stud are set with smoky quartz.

Materials

• Hand-forged damascus
• Smoky Quartz
• Wave Mokume

Features & Specs

• One-hand button lock system
• Leather carrying case
• Shipped in an elegant wood presentation box
• Dimensions: 

Blade 2.13" (54.1mm)
Handle 2.88" (73.1mm)
Overall open 5.00" (127mm)

Number in Edition: 100

The Ventana ‘Cyclone’ features a frame is in heat-colored ‘Wave Mokume' gane inlaid with desert ironwood. The blade is hand-forged 'Typhoon' damascus steel. The two-hand button lock is set with a citrine gemstone.
The Ventana folding knife is our homage to the classic gentlemen’s pocket knives of a bygone era. The picture-window cutouts in the frame reveal the rare and exotic inlays that are one of the hallmarks of William Henry’s collections.
The 'Cyclone’ features a perfect synthesis of function, modern and exotic materials; a distinctive personality statement to be worn and used for a lifetime.

Materials

• Hand-forged damascus
• Wave Mokume
• Desert Ironwood
• Citrine

Features & Specs

• Two hand button lock 2
• Leather carrying case
• Shipped in an elegant wood presentation box
• Dimensions: 

Blade 2.50" (63.5mm)
Handle 3.13" (79.5mm)
Overall open 5.60" (142.2mm)

Number in Edition: 100

The Persian 'Atascadero' features a beautiful frame in etched 'Rolling Rock' damascus by Chad Nichols, inlaid with desert ironwood. The blade is hand-forged 'Hornets Nest' damascus by Mike Norris. The one-hand button lock and the thumb stud are set with citrine. The Persian is an elegant synthesis of dramatic lines, graceful curves, and exquisite materials. A bold interpretation of a timeless design, the 'Atascadero' also features some of the exotic materials and hand-forged metals that are the hallmark of William Henry's collections; a timeless heirloom to be proudly worn and used for a lifetime before being handed-down to another generation.

Materials

• Hornet's Nest damascus
• Hand-forged damascus
• Desert Ironwood
• Citrine

Features & Specs

• One-hand button lock system
• Leather carrying case
• Shipped in an elegant wood presentation box
• Dimensions: 

Blade 2.50" (63.5mm)
Handle 3.13" (79.5mm)
Overall open 5.60" (142mm)

Number in Edition: 10

The Lancet 'MCT' features a beautiful frame in 'Raindrop' Mokume Gane by Mike Sakmar, inlaid with a scale in carbon fiber. The blade is hand-forged 'Typhoon' damascus by Rob Thomas; the one-hand button lock and the thumb stud are set with smoky quartz.

Materials

• Hand-forged damascus
• Mokume gane
• Carbon Fiber
• Smoky Quartz

Features & Specs

• One-hand button lock system
• Leather carrying case
• Shipped in an elegant wood presentation box
• Dimensions: 

Blade 2.75" (69.9mm)
Handle 3.63" (92.2mm)
Overall open 6.38" (162mm)

Number in Edition: 500

The 'Dublin' is a bold bronze pendant, finely cast with Celtic pattern and inlaid with carbon fiber. The blade is hand-forged 'Boomerang' damascus steel by Chad Nichols. A smoky quartz gemstone conceals William Henry’s button lock, ensuring that the blade is securely locked both open and closed, for safe wear and carry. The 'Dublin' comes on a PVD-coated bronze chain. A sterling silver quick release clasp allows you to take the knife off the chain for use, or to attach the knife to a key ring.

Materials

• Carbon Fiber
• Hand-forged damascus
• Sculpted Bronze
• Smoky Quartz

Features & Specs

Safe button lock system.
Dimensions: 

Blade 1.60" (40.64mm)
Handle 2.25" (56.0mm)
Overall open 3.80" (96.52mm)

Number in Edition:

The Cosmos belongs equally on your neck as a pendant, in your pocket as a keychain knife, or in a museum. Blade is hand-forged stainless damascus steel, and the handle is crafted from hand-forged MokuTi, a blending of pure and aerospace grade titanium alloys. Accents of white topaz gemstone, sterling silver, and stainless steel. On a gunmetal finish sterling chain.

Materials

• Hand-forged damascus
• Moku-Ti
• Sterling Silver
• White Topaz

Features & Specs

• Safe button lock system
• Dimensions: 

Blade 1.60" (40.64mm)
Handle 2.25" (56.0mm)
Overall open 3.80" (96.52mm)

Number in Edition:

The 'Vine' is a sterling silver pendant finely cast with a scroll pattern, featuring a hidden, state-of-the-art blade made from 'Boomerang' damascus steel, hand-forged by master forger Chad Nichols from hundreds of layers of different steel alloys and folded into unique tapestries reminiscent of waves and flowing water. A sapphire gemstone conceals William Henry’s button lock ensuring that the blade is securely locked both open and closed, for safe wear and carry.

Materials

• Hand-forged damascus
• Sterling Silver
• Sapphire

Features & Specs

• Safe button lock system
• Includes sterling silver clasp and tactical cord necklace
• Dimensions: 

Blade 1.60" (40.64mm)
Handle 2.25" (56.0mm)
Overall open 3.80" (96.52mm)

Number in Edition:

Metal on metal, in a bold yet understated contrast. This bracelet is sculpted in sterling silver, hand polished in a dual surface finish, and features links inlaid with hand-forged 'Intrepid' damascus by Chad Nichols. Finished with our interlocking sterling silver snap clasp. Perfect for you or a loved one, a classic that is always in style.

Materials

• Hand-forged damascus
• Spinel
• Sterling Silver

Features & Specs

Number in Edition:

The 'Yorick' is a finely cast sterling silver pendant featuring a hidden state-of-the-art blade. This blade is crafted from 'Intrepid' damascus steel, hand-forged by master forger Chad Nichols. A dramatic Kashimir blue topaz conceals William Henry’s button lock which ensures that the blade is securely locked while both open and closed. The 'Yorick' comes on a sterling silver chain with a quick release clasp that allows you to take the knife off of the chain for use, or to attach the knife to a key chain. A fine, functional, and timeless William Henry creation.

Materials

• Hand-forged damascus
• Kashmir Blue Topaz
• Sterling Silver

Features & Specs

• Safe button lock system
• Dimensions: 

Blade 1.60" (40.64mm)
Handle 2.25" (56.0mm)
Overall open 3.80" (96.52mm)

Number in Edition:

The 'Freedom' is a bold sterling silver pendant finely cast with timeless Americana symbols, featuring a hidden, state-of-the-art blade made from 'Intrepid' damascus steel, hand-forged by master forger Chad Nichols. A dramatic sapphire conceals William Henry’s button lock ensuring that the blade is securely locked both open and closed, for safe wear and carry. The 'Freedom' comes on a sterling silver chain. A quick release clasp, also from sterling, allows you to take the knife off the chain for use, or to attach the knife to a key chain.

Materials

• Hand-forged damascus
• Sapphire
• Sterling Silver

Features & Specs

• Safe button lock system
• Dimensions: 

Blade 1.60" (40.64mm)
Handle 2.25" (56.0mm)
Overall open 3.80" (96.52mm)

Number in Edition:

The 'Bluenote' is equally at home on your neck as a pendant, in your pocket as a keychain knife, or on display as a beautiful piece of functional art. The blade is crafted from hand-forged 'Boomerang' damascus steel; and the handle is crafted using a hand-forged heat-blued 'Twist' damascus steel, both by master damascus artist Chad Nichols. This piece also features a stunning mother of pearl inlay, fine spinel gemstone accents, a sterling silver clasp, and sterling silver chain. A fine and unique William Henry piece.

Materials

• Hand-forged damascus
• Heat-colored damascus
• Mother of Pearl
• Spinel

Features & Specs

• Safe button lock system
• Dimensions: 

Blade 1.60" (40.64mm)
Handle 2.25" (56.0mm)
Overall open 3.80" (96.52mm)

Number in Edition:

The Redeemer - featuring the Silver Warrior in all his glory, beautifully engraved and rendered. Reverse side features his four polar bears in amazing detail. Frame is solid sterling silver with inlaid sapphire button lock, and blade is crafted from hand-forged stainless Damascus steel. Includes a black PVD coated bronze chain with a quick release sterling clasp. This timeless piece can also be used as a keychain knife or attached elsewhere. Find your own inner warrior...

Materials

• Hand-forged damascus
• Sterling Silver
• Sapphire

Features & Specs

• Safe button lock system
• Dimensions: 

Blade 1.60" (40.64mm)
Handle 2.25" (56.0mm)
Overall open 3.80" (96.52mm)

Number in Edition:

The Midnight belongs equally on your neck as a pendant, in your pocket as a keychain knife, or in a museum. Blade is hand-forged stainless damascus steel, and the handle is crafted from hand-forged & etched carbon damascus steel, inlaid with 'crushed' carbon fiber. Accents of blue sapphire gemstone, sterling silver, and stainless steel. On a gunmetal finish sterling chain.

Materials

• Carbon Fiber
• Etched damascus
• Hand-forged damascus
• Sapphire

Features & Specs

• Safe button lock system
• Dimensions: 

Blade 1.60" (40.64mm)
Handle 2.25" (56.0mm)
Overall open 3.80" (96.52mm)

Number in Edition:

The Monarch 'Makaha' ('Warrior') features a beautiful frame in hand-forged 'Rolling Rock' damascus steel inlaid with Curly Koa wood. The blade is in William Henry's signature 'copper wave' damascus steel with an extra sharp core in VG-5 steel. The one-hand button lock and the thumb stud are set with Peridot. The Monarch is a simple design that is easy on the eye and effortless in the hand. The 'Makaha' features some of William Henry's signature forged metals, and represents the perfect synthesis between elegance, function, modern and exotic materials.

Materials

• Copper Wave damascus
• Hand-forged damascus
• Curly Koa
• Peridot

Features & Specs

One-hand button lock system
Leather carrying case
Shipped in an elegant wood presentation box

Dimensions: 

• Blade 2.63" (66.8mm)
• Handle 3.58" (90.9mm)
• Overall open 6.00" (152.4mm)

Number in Edition: 15

The Cabernet 'Elder' features an intricate barrel in box elder burl wood, and a light structure in aerospace grade titanium and aluminum. The accents on the carbon fiber cap are in mokume gane and hand-forged damascus, and the pocket clip is set with a citrine gemstone. This writing instrument also features William Henry's patent-pending Wavelock™ cap closure system.

Materials

• Hand-forged damascus
• Mokume gane
• Box Elder Burl
• Carbon Fiber
• Citrine

Features & Specs

• Wavelock™ Closure System
• Shipped in an elegant wood presentation box

Number in Edition: 500

The Ventana ‘Papua’ features a mesmerizing frame in 24K gold Koftgari (the ancient Indian technique of inlaying 24K gold and sterling silver in tool-steel), inlaid with a stunning scale in black lip mother of pearl. The blade is hand-forged 'Herring Bone' damascus by Rob Thomas. The two-hand button lock is set with a ruby.

Materials

• Hand-forged damascus
• Koftgari
• Blacklip Pearl
• Ruby

Features & Specs

• Two hand button lock
• Leather carrying case
• Shipped in an elegant wood presentation box
• Dimensions: 

Blade 2.50" (63.5mm)
Handle 3.13" (79.5mm)
Overall open 5.60" (142.2mm)

Number in Edition: 25

The Monarch ‘Blue Pine' features a frame in aerospace grade Titanium, inlaid with mini pine cones in resin. The blade is hand-forged 'Boomerang' damascus by Chad Nichols; the one-hand button lock and the thumb stud are set with Kashmir Blue topaz gemstones.

Materials

• Hand-forged damascus
• Kashmir Blue Topaz
• Titanium

Features & Specs

One-hand button lock system
Leather carrying case
Shipped in an elegant wood presentation box

Dimensions: 

• Blade 2.63" (66.8mm)
• Handle 3.58" (90.9mm)
• Overall open 6.00" (152.4mm)

Number in Edition: 250

The William Henry ‘Tannin’ is a double hinged sommelier’s corkscrew featuring a Damascus steel frame, lever, and foil cutter. This fine statement piece also features a stunning copper swirl carbon fiber scale, and file work along the entire spine to showcase the attention to detail that we are known for.

Materials

• Carbon Fiber
• Hand-forged damascus

Features & Specs

Number in Edition:

The Lancet 'Black Cove' features a beautiful frame in aerospace grade Titanium, inlaid with fossil coral. The blade is hand-forged Hornets Nest damascus by Chad Nichols. The one-hand button lock and thumbstud are set with spinel gemstones.

Materials

• Hand-forged damascus
• Titanium
• Fossil Coral
• Spinel

Features & Specs

• One-hand button lock system
• Leather carrying case
• Shipped in an elegant wood presentation box
• Dimensions: 

Blade 2.75" (69.9mm)
Handle 3.63" (92.2mm)
Overall open 6.38" (162mm)

Number in Edition: 10

The Monarch 'Tangier' features a beautiful bolster in hand-forged, 'X-out' damascus by Chad Nichols, inlaid with 10,000 year-old fossil Woolly Mammoth bone; the blade is black-coated Wave' damascus with an extra strong core in ZDP-189; the one-hand button lock and the thumb stud are set with citrines.

Materials

• Wave Damascus
• Hand-forged damascus
• Fossil Mammoth Bone
• Citrine

Features & Specs

One-hand button lock system
Leather carrying case
Shipped in an elegant wood presentation box

Dimensions: 

• Blade 2.63" (66.8mm)
• Handle 3.58" (90.9mm)
• Overall open 6.00" (152.4mm)

Number in Edition: 25

The Ventana ‘Cabos’ features a frame in 24K gold Koftgari (the ancient Indian technique of inlaying gold in tool-steel), inlaid with a mesmerizing piece of abalone. The blade is hand-forged 'Typhoon' damascus by Devin Thomas; the one-hand button lock is set with amethyst.

Materials

• Hand-forged damascus
• Koftgari
• Abalone
• Amethyst

Features & Specs

• One hand button lock
• Leather carrying case
• Shipped in an elegant wood presentation box
• Dimensions: 

Blade 2.50" (63.5mm)
Handle 3.13" (79.5mm)
Overall open 5.60" (142.2mm)

Number in Edition: 25

The Kestrel 'Breeze' features a beautiful frame in 'Raindrop' mokume by Mike Sakmar, inlaid with a mesmerizing piece of hawaiian Signature wood. The blade is hand-forged 'Raindrop' damascus by Mike Norris; the one-hand button lock and the thumb stud are set with honey topaz gemstones.

Materials

• Hand-forged damascus
• Honey Topaz
• Mokume gane
• Signature wood

Features & Specs

• One-hand button lock system
• Leather carrying case
• Shipped in an elegant wood presentation box
• Dimensions: 

Blade 2.13" (54.1mm)
Handle 2.88" (73.1mm)
Overall open 5.00" (127mm)

Number in Edition: 5

The Gentac ‘Pacifica' features a light and resilient frame in aerospace grade titanium, inlaid with stabilized Blue Spruce Pine Cone. The blade is hand-forged 'Intrepid' damascus steel by Chad Nichols; the one-hand button lock and the thumb stud are set with sapphires.

Materials

• Hand-forged damascus
• Titanium
• Spruce Pine Cone
• Sapphire

Features & Specs

One-hand button lock system

Dimensions: 

Blade 3.25" (82.5mm)
Handle 3.80" (96.5mm)
Overall open 7.00" (177.8mm)

All William Henry knives feature a unique serial number which is engraved into the blade to assure the authenticity and lifetime traceability of the product

This knife is shipped in an elegant wood presentation box, and it comes with a pocket clipcase made from soft, high-grade leather, with an integrated stainless steel pocket clip

Number in Edition: 250

The Ventana ‘Tidal’ features a beautiful frame in hand-forged, heat-blued 'Croc Skin' damascus steel by Chad Nichols, inlaid with abalone scales. The blade is 'Wave' damascus with an extra strong core in ZDP-189; the two-hand button lock is set with a sapphire.

Materials

• Wave Damascus
• Hand-forged damascus
• Abalone
• Sapphire

Features & Specs

• Two hand button lock
• Leather carrying case
• Shipped in an elegant wood presentation box
• Dimensions: 

Blade 2.50" (63.5mm)
Handle 3.13" (79.5mm)
Overall open 5.60" (142.2mm)

Number in Edition: 25

The Kestrel 'Gray Goose' features a frame in carbon damascus by Doug Ponzio, inlaid with a beautiful piece of 10,000 year-old fossil Woolly Mammoth bone. The blade is hand-forged 'Typhoon' damascus by Devin Thomas; the one-hand button lock and the thumb stud are set with white topaz.

Materials

• Hand-forged damascus
• Fossil Mammoth Bone
• White Topaz

Features & Specs

• One-hand button lock system
• Leather carrying case
• Shipped in an elegant wood presentation box
• Dimensions: 

Blade 2.13" (54.1mm)
Handle 2.88" (73.1mm)
Overall open 5.00" (127mm)

Number in Edition: 15

The Ventana ‘Caledonia’ features a beautiful frame in 24K gold & sterling silver Koftgari (the ancient Indian technique of inlaying gold and/or sterling silver in tool-steel), inlaid with a mesmerizing piece of abalone. The blade is hand-forged 'Typhoon' damascus by Rob Thomas; the one-hand button lock is set with a sapphire.

Materials

• Hand-forged damascus
• Abalone
• Sapphire

Features & Specs

• One hand button lock
• Leather carrying case
• Shipped in an elegant wood presentation box
• Dimensions: 

Blade 2.50" (63.5mm)
Handle 3.13" (79.5mm)
Overall open 5.60" (142.2mm)

Number in Edition: 25

The Monarch 'Coco Wave' features a handle in 'Wave' mokume gane, inlaid with cocobolo wood. The blade is hand-forged 'Intrepid' damascus by Chad Nichols; the one-hand button lock and the thumb stud are set with black onyx gemstones.

Materials

• Black Onyx
• Cocobolo
• Hand-forged damascus
• Wave Mokume

Features & Specs

One-hand button lock system
Leather carrying case
Shipped in an elegant wood presentation box

Dimensions: 

• Blade 2.63" (66.8mm)
• Handle 3.58" (90.9mm)
• Overall open 6.00" (152.4mm)

Number in Edition: 100

The Monarch ‘Blue Grove' features a frame in aerospace grade Titanium, inlaid with mini pine cones in resin. The blade is hand-forged 'Intrepid' damascus by Chad Nichols; the one-hand button lock and the thumb stud are set with white topaz gemstones.

Materials

• Hand-forged damascus
• Titanium
• White Topaz

Features & Specs

One-hand button lock system
Leather carrying case
Shipped in an elegant wood presentation box

Dimensions: 

• Blade 2.63" (66.8mm)
• Handle 3.58" (90.9mm)
• Overall open 6.00" (152.4mm)

Number in Edition: 50

The Monarch 'Island Time' features a sleek frame in aerospace grade titanium inlaid with Koa wood. The blade is hand-forged 'Boomerang' damascus by Chad Nichols. The one-hand button lock and the thumb stud are set with smoky quartz gemstones.

Materials

• Curly Koa
• Hand-forged damascus
• Smoky Quartz
• Titanium

Features & Specs

One-hand button lock system
Leather carrying case
Shipped in an elegant wood presentation box

Dimensions: 

• Blade 2.63" (66.8mm)
• Handle 3.58" (90.9mm)
• Overall open 6.00" (152.4mm)

Number in Edition: 100

The Spearpoint ‘Black Palm' features a frame in aerospace-grade titanium, inlaid with beautiful black palm wood. The blade is hand-forged 'Raindrop' damascus by Mike Norris; the one-hand button lock and the thumb stud are set with spinel gemstones.

Materials

• Black Palm
• Hand-forged damascus
• Spinel
• Titanium

Features & Specs

• One-hand button lock system
• Leather carrying case
• Shipped in an elegant wood presentation box
• Dimensions: 

Blade 3.06" (77.7mm)
Handle 4.13" (104.9.5mm)
Overall open 7.19" (182.6mm)

Number in Edition: 50

The Lancet 'Lustre' features a beautiful frame in etched 'Mind Melt' damascus by Chad Nichols, inlaid with a beautiful scale in hand-carved mother of pearl with inset colored sapphires. The blade is back tungsten DLC-coated ZDP-189 steel; the one-hand button lock and the thumb stud are set with rubies.

Materials

• Hand-forged damascus
• Carved Mother of Pearl
• Inset colored sapphires
• Ruby

Features & Specs

• One-hand button lock system
• Leather carrying case
• Shipped in an elegant wood presentation box
• Dimensions: 

Blade 2.75" (69.9mm)
Handle 3.63" (92.2mm)
Overall open 6.38" (162mm)

Number in Edition: 25

The Spearpoint ‘Blue Buckeye’ features a light and resilient frame in aerospace grade titanium, inlaid with a beautiful piece of blue/green Buckeye burl wood. The blade is hand-forged 'Boomerang' damascus steel ; the one-hand button lock and the thumb stud are set with white topaz gemstones.

Materials

• Hand-forged damascus
• Titanium
• White Topaz

Features & Specs

• One-hand button lock system
• Leather carrying case
• Shipped in an elegant wood presentation box
• Dimensions: 

Blade 3.06" (77.7mm)
Handle 4.13" (104.9.5mm)
Overall open 7.19" (182.6mm)

Number in Edition: 100

The Lancet 'Horizon' features a frame in aerospace grade titanium, inlaid with the ring-cut section of a 10,000 year-old fossil Woolly Mammoth tusk. The blade is hand-forged 'Intrepid' damascus by Chad Nichols. The one-hand button lock and thumb stud are set with spinel gemstones.

Materials

• Hand-forged damascus
• Titanium
• Fossil Mammoth Tusk
• Spinel

Features & Specs

• One-hand button lock system
• Leather carrying case
• Shipped in an elegant wood presentation box
• Dimensions: 

Blade 2.75" (69.9mm)
Handle 3.63" (92.2mm)
Overall open 6.38" (162mm)

Number in Edition: 25

The Monarch 'Textron' features a sleek frame in aerospace grade titanium inlaid with carbon fiber scales. The blade is hand-forged 'Boomerang' damascus by Chad Nichols. The one-hand button lock and the thumb stud are set with white topaz gemstones.

Materials

• Carbon Fiber
• Hand-forged damascus
• Titanium
• White Topaz

Features & Specs

One-hand button lock system
Leather carrying case
Shipped in an elegant wood presentation box

Dimensions: 

• Blade 2.63" (66.8mm)
• Handle 3.58" (90.9mm)
• Overall open 6.00" (152.4mm)

Number in Edition: 100

The Lancet Noble' features a frame in etched 'Mind Melt' damascus by Chad Nichols, inlaid with carbon fiber. The blade is back tungsten DLC-coated ZDP-189 'Wave' damascus steel; the one-hand button lock and the thumb stud are set with smoky quartz.

Materials

• Hand-forged damascus
• Carved Mother of Pearl
• Inset colored sapphires
• Ruby

Features & Specs

• One-hand button lock system
• Leather carrying case
• Shipped in an elegant wood presentation box
• Dimensions: 

Blade 2.75" (69.9mm)
Handle 3.63" (92.2mm)
Overall open 6.38" (162mm)

Number in Edition: 50

The Spearpoint ‘Dark Rain' features a light and resilient frame which is machined from aerospace grade titanium, then finished with a fine blast-polishing. The frame is inlaid with carbon fiber, and the blade is hand-forged 'Raindrop' damascus by Mike Norris. The one-hand button lock and the thumb stud are set with black onyx gemstones.

Materials

• Black Onyx
• Carbon Fiber
• Hand-forged damascus
• Titanium

Features & Specs

• One-hand button lock system
• Titanium pocket clip
• Shipped in an elegant wood presentation box
• Dimensions: 

Blade 3.06" (77.7mm)
Handle 4.13" (104.9.5mm)
Overall open 7.19" (182.6mm)

Number in Edition: 50

The Omni 'Spruce' features a frame in aerospace grade titanium, inlaid with stabilized Blue Spruce Pinecone. The blade is hand-forged 'Boomerang' damascus by Chad Nichols. The ambidextrous thumb stud is inset with white topaz gemstones.

Materials

• Hand-forged damascus
• Titanium
• Spruce Pine Cone
• White Topaz

Features & Specs

• One-hand open, lock-back system
• Leather carrying case
• Shipped in an elegant wood presentation box
• Dimensions: 

Blade 2.75" (69.8mm)
Handle 3.70" (94mm)
Overall open 6.50" (165mm)

Number in Edition: 250.

The Gentac 'Mardi Gras features a beautiful frame in aerospace grade Titanium, inlaid with mini pine cones in resin. The blade is hand-forged 'Hornets Nest' damascus by Mike Norris; the one-hand button lock and the thumb stud are set with citrine gemstones.

Materials

• Acrylic
• Citrine
• Hand-forged damascus
• Titanium

Features & Specs

• One-hand button lock system
• Shipped in an elegant wood presentation box
• Dimensions: 

Blade 3.25" (82.5mm)
Handle 3.80" (96.5mm)
Overall open 7.00" (177.8mm)

Number in Edition: 250

The Omni 'Maple' features a frame in aerospace grade titanium, inlaid with beautifully natural maple burl. The blade is hand-forged 'Intrepid' damascus by Chad Nichols. The ambidextrous thumb stud is inset with citrine gemstones.

Materials

• Hand-forged damascus
• Titanium
• Maple Burl wood
• Citrine

Features & Specs

• One-hand open, lock-back system
• Leather carrying case
• Shipped in an elegant wood presentation box
• Dimensions: 

Blade 2.75" (69.8mm)
Handle 3.70" (94mm)
Overall open 6.50" (165mm)

Number in Edition: 250

The Monarch ‘Red Wave' features a beautiful frame in hand-forged 'River Rock' damascus by Chad Nichols, inlaid with stabilized Blue Spruce Pinecone. The blade is black 'Wave' damascus with a core of ZDP-189; the one-hand button lock and the thumb stud are set with Blazing Red topaz gemstones.

Materials

• Hand-forged damascus
• Spruce Pine Cone
• Red Topaz

Features & Specs

One-hand button lock system
Leather carrying case
Shipped in an elegant wood presentation box

Dimensions: 

• Blade 2.63" (66.8mm)
• Handle 3.58" (90.9mm)
• Overall open 6.00" (152.4mm)

Number in Edition: 100

The Omni 'Red Shock' features a frame in aerospace grade titanium, inlaid with a natural wood and resin hybrid. The blade is hand-forged 'Intrepid' damascus by Chad Nichols. The ambidextrous thumb stud is inset with white topaz gem stones.

Materials

• Hand-forged damascus
• Titanium
• White Topaz

Features & Specs

• One-hand open, lock-back system
• Leather carrying case
• Shipped in an elegant wood presentation box
• Dimensions: 

Blade 2.75" (69.8mm)
Handle 3.70" (94mm)
Overall open 6.50" (165mm)

Number in Edition: 100

The Persian 'Seaside' features a beautiful frame in etched 'Rolling Rock' damascus by Chad Nichols, inlaid with 100,000 year-old fossil coral. The blade is 'Wave' damascus with an extra-strong core in ZDP-189. The one-hand button lock and the thumb stud are set with sapphires.

Materials

• Wave Damascus
• Hand-forged damascus
• Fossil Coral
• Sapphire

Features & Specs

• One-hand button lock system
• Leather carrying case
• Shipped in an elegant wood presentation box
• Dimensions: 

Blade 2.50" (63.5mm)
Handle 3.13" (79.5mm)
Overall open 5.60" (142mm)

Number in Edition: 50

The Omni 'Impact' features a frame in aerospace grade titanium, inlaid with a beautiful natural wood and resin hybrid. The blade is hand-forged 'Intrepid' damascus by Chad Nichols. The ambidextrous thumb stud is inset with spinel gemstones.

Materials

• Hand-forged damascus
• Spinel
• Titanium

Features & Specs

• One-hand open, lock-back system
• Leather carrying case
• Shipped in an elegant wood presentation box
• Dimensions: 

Blade 2.75" (69.8mm)
Handle 3.70" (94mm)
Overall open 6.50" (165mm)

Number in Edition: 5

The Lancet 'Zambezi' features a beautiful frame in heat-blued 'Bones' damascus by Larry Donnelly, inlaid with zebrawood. The blade is hand forged 'Herring Bone' damascus by Rob Thomas; the one-hand button lock and the thumb stud are set with spessartite.

Materials

• Hand-forged damascus
• Heat-colored damascus
• Zebrawood
• Spessartite

Features & Specs

• One-hand button lock system
• Leather carrying case
• Shipped in an elegant wood presentation box
• Dimensions: 

Blade 2.75" (69.9mm)
Handle 3.63" (92.2mm)
Overall open 6.38" (162mm)

Number in Edition: 10

The Persian 'Pale Moon' features a beautiful frame in copper/niobium composite (superconductor), inlaid with mother of pearl. The blade is hand-forged 'Typhoon'' damascus by Devin Thomas. The one-hand button lock and the thumb stud are set with opals.

Materials

• Hand-forged damascus
• Titanium
• Fossil Mammoth Bone
• Spessartite

Features & Specs

• One-hand button lock system
• Leather carrying case
• Shipped in an elegant wood presentation box
• Dimensions: 

Blade 2.50" (63.5mm)
Handle 3.13" (79.5mm)
Overall open 5.60" (142mm)

Number in Edition: 25

This elegant Pikatti folding knife features a frame in 24K gold & Sterling Silver Koftgari, inlaid with 10,000 year-old fossil walrus ivory. The blade is hand-forged 'Hornets Nest' damascus by Mike Norris. The button lock and thumb stud are set with citrines.

Materials

• Hand-forged damascus
• Fossil Walrus tusk
• Citrine

Features & Specs

• One-hand button lock system
• Leather carrying case
• Shipped in an elegant wood presentation box
• Dimensions: 

Blade 2.00" (50.8mm)
Handle 2.63" (66.8mm)
Overall open 4.63" (117.6mm)

Number in Edition: 50

The Kestrel 'Cloud' features a beautiful frame in hand-forged 'Raindrop' Mokume Gane by Mike Sakmar, inlaid with white Mother of Pearl. The blade is hand forged 'Raindrop' damascus by Mike Norris; the one-hand button lock and the thumb stud are set with smoky quartz gemstones.

Materials

• Hand-forged damascus
• Mokume gane
• Mother of Pearl
• Smoky Quartz

Features & Specs

One-hand button lock system
Leather carrying case
Shipped in an elegant wood presentation box

Dimensions: 

• Blade 2.13" (54.1mm)
• Handle 2.88" (73.15mm)
• Overall open 5.00" (127mm)

Number in Edition: 50

This Monarch 'Autumn' features a handle in 'Wave' mokume gane, inlaid with orange spalted beech wood. The blade is hand-forged 'Hornets Nest' damascus steel by Mike Norris; the one-hand button lock and the thumb stud are set with citrine gemstones.

Materials

• Hand-forged damascus
• Wave Mokume
• Beech Wood
• Citrine

Features & Specs

One-hand button lock system
Leather carrying case
Shipped in an elegant wood presentation box

Dimensions: 

• Blade 2.63" (66.8mm)
• Handle 3.58" (90.9mm)
• Overall open 6.00" (152.4mm)

Number in Edition: 500

This elegant Pikatti folding knife features a frame in hand-forged 'Brain Wave' damascus by Chad Nichols, inlaid with 100,000 year-old fossil coral. The blade is hand-forged 'Raindrop' damascus by Mike Norris; the button lock and thumb stud are set with white topaz.

Materials

• Hand-forged damascus
• Fossil Coral
• White Topaz

Features & Specs

• One-hand button lock system
• Leather carrying case
• Shipped in an elegant wood presentation box
• Dimensions: 

Blade 2.00" (50.8mm)
Handle 2.63" (66.8mm)
Overall open 4.63" (117.6mm)

Number in Edition: 25

The Lancet 'Kauai' features a beautiful bolster in 24K gold koftgari (the ancient Indian art of inlaying gold wire in tool steel), inlaid with a piece of mother of pearl; the blade is hand-forged 'Raindrop' damascus by Mike Norris; the one-hand button lock and the thumb stud are set with citrines.

Materials

• Hand-forged damascus
• Koftgari
• Mother of Pearl
• Citrine

Features & Specs

• One-hand button lock system
• Leather carrying case
• Shipped in an elegant wood presentation box
• Dimensions: 

Blade 2.75" (69.9mm)
Handle 3.63" (92.2mm)
Overall open 6.38" (162mm)

Number in Edition: 25

The Lancet 'Sleet' features a beautiful frame in hand-forged, heat-blued 'Cell Division' damascus by Chad Nichols, inlaid with mother of pearl. The blade is hand-forged 'Raindrop' damascus by Mike Norris; the one-hand button lock and thumb stud are set with white topaz.

Materials

• Hand-forged damascus
• Heat-colored damascus
• Mother of Pearl
• White Topaz

Features & Specs

• One-hand button lock system
• Leather carrying case
• Shipped in an elegant wood presentation box
• Dimensions: 

Blade 2.63" (66.8mm)
Handle 3.58" (90.9mm)
Overall open 6.00" (152.4mm)

Number in Edition: 25

The Spearpoint ‘Forest Grove’ features a light and resilient frame in aerospace grade titanium, inlaid with a beautiful piece of orange spalted beech wood. The blade hand-forged 'Intrepid' damascus steel by Chad Nichols. The one-hand button lock and the thumb stud are set with citrine gemstones.

Materials

• Hand-forged damascus
• Titanium
• Beech Wood
• Citrine

Features & Specs

• One-hand button lock system
• Leather carrying case
• Shipped in an elegant wood presentation box
• Dimensions: 

Blade 3.06" (77.7mm)
Handle 4.13" (104.9.5mm)
Overall open 7.19" (182.6mm)

Number in Edition: 500

The Pikatti 'Bounty' folding knife features a frame in 24K gold Koftgari inlaid with mother of pearl. The blade is hand-forged 'Hornets Nest' damascus by Mike Norris. The button lock and thumb stud are set with white topaz gem stones.

Materials

• Hand-forged damascus
• Koftgari
• Mother of Pearl
• White Topaz

Features & Specs

• One-hand button lock system
• Leather carrying case
• Shipped in an elegant wood presentation box
• Dimensions: 

Blade 2.00" (50.8mm)
Handle 2.63" (66.8mm)
Overall open 4.63" (117.6mm)

All William Henry knives feature a unique serial number which is engraved into the blade to assure the authenticity and lifetime traceability of the product

This knife is shipped in an elegant wood presentation box, and it includes a pocket clipcase made from soft, high-grade leather, with an integrated stainless steel pocket clip

Number in Edition: 10

The Lancet 'Trask River' features a beautiful frame in 'Twist' Mokume Gane by Mike Sakmar, inlaid with Norway blue spruce pinecone. The blade is hand-forged 'Hornets Nest' damascus by Mike Norris; the one-hand button lock and the thumb stud are set with sapphire gemstones.

Materials

• Hand-forged damascus
• Mokume gane
• Spruce Pine Cone
• Sapphire

Features & Specs

• One-hand button lock system
• Leather carrying case
• Shipped in an elegant wood presentation box
• Dimensions: 

Blade 2.75" (69.9mm)
Handle 3.63" (92.2mm)
Overall open 6.38" (162mm)

Number in Edition: 250

The Lancet 'Green Pine' features a frame in hand-forged 'Rolling Rock' damascus, inlaid with Norway Blue Spruce Pine cone. The blade is 'Black Wave' damascus with a ZDP-189 core; the one-hand button lock and the thumb stud are set with white topaz gem stones.

Materials

• Hand-forged damascus
• Spruce Pine Cone
• White Topaz

Features & Specs

• One-hand button lock system
• Dimensions: 

Blade 2.75" (69.9mm)
Handle 3.63" (92.2mm)
Overall open 6.38" (162mm)

All William Henry knives feature a unique serial number which is engraved into the blade to assure the authenticity and lifetime traceability of the product

This knife is shipped in an elegant wood presentation box, and it comes with a pocket clipcase made from soft, high-grade leather, with an integrated stainless steel pocket clip

Number in Edition: 20

The Gentac 'Woodsman' features light and durable titanium frame inlaid with maple burl wood. The blade is hand-forged 'Boomerang' damascus by Chad Nichols. The one-hand button lock and the thumb stud are set with smoky quartz gemstones.

Materials

• Hand-forged damascus
• Maple Burl wood
• Smoky Quartz
• Titanium

Features & Specs

One-hand button lock system

Dimensions: 

Blade 3.25" (82.5mm)
Handle 3.80" (96.5mm)
Overall open 7.00" (177.8mm)

 

 

Number in Edition: 100

The Gentac ‘Cone' features a light and resilient frame in aerospace grade titanium, inlaid with stabilized Blue Spruce Pine Cone. The blade is hand-forged 'Raindrop' damascus steel by Mike Norris; the one-hand button lock and the thumb stud are set with sapphires.

Materials

• Hand-forged damascus
• Titanium
• Spruce Pine Cone
• Sapphire

Features & Specs

One-hand button lock system

Dimensions: 

Blade 3.25" (82.5mm)
Handle 3.80" (96.5mm)
Overall open 7.00" (177.8mm)

All William Henry knives feature a unique serial number which is engraved into the blade to assure the authenticity and lifetime traceability of the product
This knife is shipped in an elegant wood presentation box, and it comes with a pocket clip case made from soft, high-grade leather, with an integrated stainless steel pocket clip

 

Number in Edition: 500

The Omni 'Black Sea' features a frame in aerospace grade titanium, inlaid with incredible 'Black Sea' Dichrolam®. The blade is hand-forged 'Intrepid' damascus by Chad Nichols. The ambidextrous thumb stud is inset with spinel gemstones.

Materials

• Dichrolam®
• Hand-forged damascus
• Spinel
• Titanium

Features & Specs

• One-hand open, lock-back system
• Leather carrying case
• Shipped in an elegant wood presentation box
• Dimensions: 

Blade 2.75" (69.8mm)
Handle 3.70" (94mm)
Overall open 6.50" (165mm)

Number in Edition: 5

The Lancet 'Wall Street' features a frame in hand-forged, heat-blued damascus by Larry Donnelly, inlaid with carbon fiber. The blade is hand-forged 'Herring Bone' damascus by Rob Thomas; the one-hand button lock and the thumb stud are set with sapphires.

Materials

• Hand-forged damascus
• Heat-colored damascus
• Carbon Fiber
• Sapphire

Features & Specs

• One-hand button lock system
• Leather carrying case
• Shipped in an elegant wood presentation box
• Dimensions: 

Blade 2.75" (69.9mm)
Handle 3.63" (92.2mm)
Overall open 6.38" (162mm)

Number in Edition: 25

This Monarch 'Autumn Colors' features a handle in 'Wave' mokume gane, inlaid with orange spalted beech wood. The blade is hand-forged 'Intrepid' damascus steel by Chad Nichols; the one-hand button lock and the thumb stud are set with citrine gemstones.

Materials

• Hand-forged damascus
• Wave Mokume
• Beech Wood
• Citrine

Features & Specs

One-hand button lock system
Leather carrying case
Shipped in an elegant wood presentation box

Dimensions: 

• Blade 2.63" (66.8mm)
• Handle 3.58" (90.9mm)
• Overall open 6.00" (152.4mm)

Number in Edition: 250

The Omni 'Cobal' features a frame in blue-anodized, aerospace grade titanium, inlaid with carbon fiber. The blade is hand-forged 'Boomerang' damascus by Chad Nichols. The ambidextrous thumb stud is inset with rhodolite gemstones.

Materials

• Carbon Fiber
• Hand-forged damascus
• Titanium

Features & Specs

• One-hand open, lock-back system
• Leather carrying case
• Shipped in an elegant wood presentation box
• Dimensions: 

Blade 2.75" (69.8mm)
Handle 3.70" (94mm)
Overall open 6.50" (165mm)

Number in Edition: 250

The Spearpoint ‘Woodland’ features a light and resilient frame in aerospace grade titanium, inlaid with mini pine cones in acrylic. The blade is hand-forged 'Boomerang' damascus by Chad Nichols; the one-hand button lock and the thumb stud are set with Kashmir Blue topaz gemstones.

Materials

• Hand-forged damascus
• Titanium
• Kashmir Blue Topaz

Features & Specs

One-hand button lock system

Dimensions: 

Blade 3.06" (77.7mm)
Handle 4.13" (104.9.5mm)
Overall open 7.19" (182.6mm)

All William Henry knives feature a unique serial number which is engraved into the blade to assure the authenticity and lifetime traceability of the product
This knife is shipped in an elegant wood presentation box, and it comes with a pocket clip case made from soft, high-grade leather, with an integrated stainless steel pocket clip

 

Number in Edition: 250

The Monarch ‘Crimson Ridge' features a beautiful frame in hand-forged 'Brainwave' damascus by Chad Nichols, inlaid with stabilized Blue Spruce Pinecone. The blade is 'Wave' damascus steel with a core in extra-strong ZDP-189 steel, the one-hand button lock and the thumb stud are set with Blazing Red topaz gemstones.

Materials

• Hand-forged damascus
• Spruce Pine Cone
• Red Topaz

Features & Specs

One-hand button lock system
Leather carrying case
Shipped in an elegant wood presentation box

Dimensions: 

• Blade 2.63" (66.8mm)
• Handle 3.58" (90.9mm)
• Overall open 6.00" (152.4mm)

Number in Edition: 100

The F8-5 Cabernet is a beautiful fountain pen featuring a barrel in Xylay wood, and a light structure in aerospace grade titanium and aluminum. The German-made nib is in 18K gold, the accents on the carbon fiber cap are in Mokume Gane and the hand-forged damascus pocket clip is set with citrine.

Materials

• Hand-forged damascus
• 18K Gold
• Mokume gane
• Titanium
• Carbon Fiber
• Xylay wood
• Citrine

Features & Specs

• Ships with Medium nib. Fine or Broad nib available upon request
• WaveLock closing system
• Shipped in an elegant wood presentation box

Number in Edition: 100

The Lancet 'Pueblo' features a beautiful frame in 'Twist' Mokume Gane by Mike Sakmar, with desert ironwood scales. The blade is hand forged 'Hornets Nest' damascus by Mike Norris; the one-hand button lock and the thumb stud are set with citrine gemstones.

Materials

• Hand-forged damascus
• Mokume gane
• Desert Ironwood
• Citrine

Features & Specs

• One-hand button lock system
• Leather carrying case
• Shipped in an elegant wood presentation box
• Dimensions: 

Blade 2.75" (69.9mm)
Handle 3.63" (92.2mm)
Overall open 6.38" (162mm)

Number in Edition: 250

The Kestrel 'Starship' features a beautiful frame in 24K gold and silver koftgari, inlaid with carbon fiber. The blade is 'Hornets Nest' damascus hand forged by Mike Norris; the one-hand button lock and the thumb stud are set with spinel gemstones.

Materials

• Hand-forged damascus
• Koftgari
• Carbon Fiber
• Spinel

Features & Specs

• One-hand button lock system
• Leather carrying case
• Shipped in an elegant wood presentation box
• Dimensions: 

Blade 2.13" (54.1mm)
Handle 2.88" (73.1mm)
Overall open 5.00" (127mm)

Number in Edition: 100

The Kestrel 'Bella Morte' features a frame in hand-forged, etched 'Ladder' damascus by Mike Norris, inlaid with a beautiful piece of hand-carved mother of pearl. The blade is 'Wave' damascus with an extra strong core in ZDP-189; the one-hand button lock and the thumb stud are set with spinel.

Materials

• Wave Damascus
• Hand-forged damascus
• Carved Mother of Pearl
• Spinel

Features & Specs

• One-hand button lock system
• Leather carrying case
• Shipped in an elegant wood presentation box
• Dimensions: 

Blade 2.13" (54.1mm)
Handle 2.88" (73.1mm)
Overall open 5.00" (127mm)

Number in Edition: 50

The Lancet 'Blue Flash' features a beautiful frame in hand-forged 'Brain Wave' damascus by Chad Nichols, inlaid with 'Black Sea' dichrolam. The blade is 'Wave' damascus with a VG-10 core; the one-hand button lock and the thumb stud are set with white topaz gemstones.

Materials

• Dichrolam®
• Hand-forged damascus
• Wave Damascus
• White Topaz

Features & Specs

• One-hand button lock system
• Leather carrying case
• Shipped in an elegant wood presentation box
• Dimensions: 

Blade 2.75" (69.9mm)
Handle 3.63" (92.2mm)
Overall open 6.38" (162mm)

Number in Edition: 5

The Monarch ‘Ponderosa' features a beautiful frame in hand-forged 'Twist' mokume gane by Mike Sakmar, inlaid with stabilized Blue Spruce Pinecone. The blade is hand-forged 'Hornets Nest' damascus steel by Mike Norris; the one-hand button lock and thumb stud are set with Blazing Red topaz gemstones.

Materials

• Hand-forged damascus
• Mokume gane
• Spruce Pine Cone
• Red Topaz

Features & Specs

One-hand button lock system
Leather carrying case
Shipped in an elegant wood presentation box

Dimensions: 

• Blade 2.63" (66.8mm)
• Handle 3.58" (90.9mm)
• Overall open 6.00" (152.4mm)

Number in Edition: 250

The Gentac ‘Tendril’ features a light and resilient frame in aerospace grade titanium, inlaid with beautiful hand-carved sterling silver scales with inset colored sapphires. The blade is hand-forged 'Typhoon' damascus by Rob Thomas; the one-hand button lock and the thumb stud are set with white topaz.

Materials

• Hand-forged damascus
• Carved Sterling Silver
• Titanium
• Inset colored sapphires
• White Topaz

Features & Specs

One-hand button lock system

Dimensions: 

Blade 3.25" (82.5mm)
Handle 3.80" (96.5mm)
Overall open 7.00" (177.8mm)

All William Henry knives feature a unique serial number which is engraved into the blade to assure the authenticity and lifetime traceability of the product

This knife is shipped in an elegant wood presentation box, and it comes with a pocket clipcase made from soft, high-grade leather, with an integrated stainless steel pocket clip

Number in Edition: 100

The Monarch 'Beta' features a beautiful frame in 'Twist' Mokume Gane by Mike Sakmar, inlaid with carbon fiber scales; the blade is hand-forged 'Raindrop' damascus by Mike Norris; the one-hand button lock and the thumb stud are set with black onyx gemstones.

Materials

• Black Onyx
• Carbon Fiber
• Hand-forged damascus
• Mokume gane

Features & Specs

One-hand button lock system
Leather carrying case
Shipped in an elegant wood presentation box

Dimensions: 

• Blade 2.63" (66.8mm)
• Handle 3.58" (90.9mm)
• Overall open 6.00" (152.4mm)

Number in Edition: 100

A very limited offering, the Daybreak belongs equally on your neck as a pendant, in your pocket as a keychain knife, or in a museum. Blade is hand-forged stainless damascus steel, and the handle is crafted from hand-forged Mokume Gane inlaid with black lip mother of pearl. Accents of white topaz gemstone, sterling silver, and stainless steel. On a gunmetal finish sterling chain.

Materials

• Blacklip Pearl
• Hand-forged damascus
• Mokume gane
• White Topaz

Features & Specs

• Safe button lock system
• Dimensions: 

Blade 1.60" (40.64mm)
Handle 2.25" (56.0mm)
Overall open 3.80" (96.52mm)

Number in Edition:

The Dichro is without equal in the world of exotic cigar cutters.  The thru hole in the titanium frame will accommodate up to a 52 gauge cigar, and the single sided precision ground damascus blade cuts cleanly thru your preferred smoke.  The damascus is our stainless 'Intrepid' pattern by Chad Nichols, featuring three alloys forged together into a tapestry in steel with an optimum hardness of HRC 59 for wear resistance.  Inlayed dichroic glass composite is hand-polished to fine luster, with red garnet gemstones, titanium, stainless, and sterling hardware completing the presentation.  This piece works beautifully as a cigar cutter and general purpose pocket knife!

Materials

• Dichrolam®
• Garnet
• Hand-forged damascus
• Titanium

Features & Specs

Dimensions:

Blade: 2.75"

Handle: 3.75"

Open: 6.5

Number in Edition: 500

The Gentac ‘Spiny’ features a light and resilient frame in aerospace grade titanium, inlaid with spiny oyster & turquoise. The blade is stainless 'Boomerang' damascus steel by Chad Nichols. The one-hand button lock and the thumb stud are set with white topaz gems.

Materials

• Hand-forged damascus
• Spiny Oyster & Turquoise
• Titanium
• White Topaz

Features & Specs

One-hand button lock system

Dimensions: 

Blade 3.25" (82.5mm)
Handle 3.80" (96.5mm)
Overall open 7.00" (177.8mm)

All William Henry knives feature a unique serial number which is engraved into the blade to assure the authenticity and lifetime traceability of the product,
The knife is shipped in an elegant wood presentation box, and it comes with a pocket clipcase made from soft, high-grade leather, with an integrated stainless steel pocket clip

 

Number in Edition: 5

The Monarch 'Carefree Buffalo Fossilized' Exclusive Edition features an elegant frame in 'Twist' Mokume Gane (the ancient forging technique used for decorating the hilts of Samurai swords) by Mike Sakmar, inlaid with fossilized Bison bone. The blade is hand-forged 'Boomerang' damascus steel by Chad Nichols. The one-hand button lock and the thumb stud are set with citrine gemstones.

Materials

• Hand-forged damascus
• Mokume gane
• Citrine

Features & Specs

One-hand button lock system
Leather carrying case
Shipped in an elegant wood presentation box

Dimensions: 

• Blade 2.63" (66.8mm)
• Handle 3.58" (90.9mm)
• Overall open 6.00" (152.4mm)

Number in Edition: 25

The Ventana ‘Shroud’ features a frame in 24K gold & silver Koftgari (the ancient Indian technique of inlaying gold in tool-steel), inlaid with a mesmerizing piece of abalone. The blade is hand-forged 'Herring Bone' damascus by Rob Thomas; the one-hand button lock is set with smoky quartz.

Materials

• Hand-forged damascus
• Abalone
• Smoky Quartz

Features & Specs

• One hand button lock
• Leather carrying case
• Shipped in an elegant wood presentation box
• Dimensions: 

Blade 2.50" (63.5mm)
Handle 3.13" (79.5mm)
Overall open 5.60" (142.2mm)

Number in Edition: 25

The Lancet 'Black & White' is an exclusive edition only available from Unicorn. This beautiful pocketknife features a frame in aerospace grade titanium, inlaid with the ring-cut section of a 10,000 year-old fossil Woolly Mammoth tusk. The blade is hand-forged 'Intrepid' damascus by Chad Nichols; the one-hand button lock, the thumb stud, and the lanyard beads are set with spinel gem stones.

Materials

• Fossil Mammoth Tusk
• Hand-forged damascus
• Spinel
• Titanium

Features & Specs

• One-hand button lock system
• Leather carrying case
• Shipped in an elegant wood presentation box
• Dimensions: 

Blade 2.75" (69.9mm)
Handle 3.63" (92.2mm)
Overall open 6.38" (162mm)

Number in Edition: 18

The Havana pays homage to the birthplace of fine cigars, and is without equal in the world of exotic cigar cutters.  The thru hole in the titanium frame will accommodate up to a 52 gauge cigar, and the single sided precision ground damascus blade cuts cleanly thru your preferred smoke.  The damascus is our stainless 'Boomerang' pattern by Chad Nichols featuring three alloys forged together into a tapestry in steel with an optimum hardness of HRC 59 for wear resistance.  Inlayed Arizona Ironwood is hand-polished to fine luster, and citrine gemstones, titanium, stainless, and sterling hardware complete the presentation.

Materials

• Citrine
• Desert Ironwood
• Hand-forged damascus
• Titanium

Features & Specs

Dimensions:

Blade: 2.75"

Handle: 3.75"

Open: 6.5

Number in Edition: 500

The William Henry ‘Cluster’ is a double hinged sommelier’s corkscrew featuring a Damascus steel frame, lever, and foil cutter. This fine statement piece also features a stunning snakewood inlay, and file work along the entire spine to showcase the attention to detail that we are known for.

 

Materials

• Hand-forged damascus
• Snakewood

Features & Specs

Number in Edition:

The Spearpoint ‘Queensland’ features a light and resilient frame in aerospace grade titanium that has been blast-polished, then inlaid with a beautiful piece of stabilized pine cone. The stunning 'Boomerang' damascus blade was forged by master damascus forger Chad Nichols, and as a thoughtful finishing touch, the one-hand button lock and the thumb stud have been set with fine Kashmir blue topaz. A truly outstanding William Henry piece.

Materials

• Hand-forged damascus
• Titanium
• Spruce Pine Cone
• Kashmir Blue Topaz

Features & Specs

• One-hand button lock system
• Leather carrying case
• Shipped in an elegant wood presentation box
• Dimensions: 

Blade 3.06" (77.7mm)
Handle 4.13" (104.9.5mm)
Overall open 7.19" (182.6mm)

Number in Edition: 250

This Monarch 'Meta' features a handle in heat-colored 'Wave' mokume, inlaid with carbon fiber scales. The blade is hand-forged 'Raindrop' damascus by Mike Norris; the one-hand button lock and the thumb stud are set with iolite gemstones.

Materials

• Carbon Fiber
• Hand-forged damascus
• Iolite
• Wave Mokume

Features & Specs

One-hand button lock system
Leather carrying case
Shipped in an elegant wood presentation box

Dimensions: 

• Blade 2.63" (66.8mm)
• Handle 3.58" (90.9mm)
• Overall open 6.00" (152.4mm)

Number in Edition: 250

The Gentac ‘Spiny Oyster’ features a light and resilient frame in aerospace grade titanium, inlaid with spiny oyster & turquoise. The blade is stainless 'Hornets Nest' damascus steel by Mike Norris. The one-hand button lock and the thumb stud are set with blue topaz gems.

Materials

• Blue Topaz
• Hand-forged damascus
• Spiny Oyster & Turquoise
• Titanium

Features & Specs

One-hand button lock system

Dimensions: 

Blade 3.25" (82.5mm)
Handle 3.80" (96.5mm)
Overall open 7.00" (177.8mm)

 

 

Number in Edition: 100

The C15 'Kona' features premium Curly Koa wood from the namesake Hawaiian islands, set into a lightweight yet durable titanium frame. The blade is hand-forged 'Ripple' damascus steel by Chad Nichols. Fittings are tempered stainless, titanium, sterling silver and inlaid smoky quartz in 18K bezels. 

Materials

• Curly Koa
• Hand-forged damascus
• Smoky Quartz
• Titanium

Features & Specs

• One-hand button lock system
• Leather carrying case
• Titanium pocket clip
• Dimensions: 

 

Blade 3.88" (98.5mm)
Handle 4.63" (117.6mm)
Overall open 7.75" (196.8mm)

Number in Edition: 50

The Kestrel 'Night Sky' features a beautiful frame in 24K gold Koftgari, inlaid with Norway Blue Spruce pine cone. The blade is hand-forged 'Typhoon' damascus by Rob Thomas; the one-hand button lock and the thumb stud are set with white topaz gemstones.

Materials

• Hand-forged damascus
• Koftgari
• Spruce Pine Cone
• White Topaz

Features & Specs

• One-hand button lock system
• Leather carrying case
• Shipped in an elegant wood presentation box
• Dimensions: 

Blade 2.13" (54.1mm)
Handle 2.88" (73.1mm)
Overall open 5.00" (127mm)

Number in Edition: 5

Cut a Blue Streak with this edition of our C15 pocket knife. Functional elegance personified, this piece features natural sugar pine cone captured in a durable blue acrylic resin, bias cut and hand polished. Set into aerospace-grade titanium frame, with a blade crafted from hand-forged ‘Ripple’ pattern stainless damascus that marries art and utility at the highest level. Fittings are tempered stainless, titanium, and inlaid sapphires with 18K bezels.

Materials

• Hand-forged damascus
• Titanium
• Curly Koa
• Corundum Sapphire

Features & Specs

• One-hand button lock system
• Leather carrying case
• Shipped in an elegant wood presentation box
• Dimensions: 
\r\n

Blade 3.88" (98.5mm)
Handle 4.63" (117.6mm)
Overall open 7.75" (196.8mm)

Number in Edition: 250

The Kestrel 'Starburst' features a beautiful frame in 24K gold Koftgari, inlaid with Amboyna burl. The blade is hand-forged 'Typhoon' damascus by Rob Thomas; the one-hand button lock and the thumb stud are set with white topaz gemstones.

Materials

• Hand-forged damascus
• Koftgari
• Amboyna Burl
• White Topaz

Features & Specs

• One-hand button lock system
• Leather carrying case
• Shipped in an elegant wood presentation box
• Dimensions: 

Blade 2.13" (54.1mm)
Handle 2.88" (73.1mm)
Overall open 5.00" (127mm)

Number in Edition: 4

This 'Unicorn 2020 Exclusive' folding knife features a frame in 24K gold Koftgari (the ancient Indian technique of inlaying gold and/or sterling silver in tool-steel), inlaid with maple burl wood. The blade is hand-forged 'Boomerang' damascus by Chad Nichols. The one-hand button lock and the thumb stud are set with citrine gemstones.

Materials

• Citrine
• Hand-forged damascus
• Koftgari
• Maple Burl wood

Features & Specs

One-hand button lock system
Leather carrying case
Shipped in an elegant wood presentation box

Dimensions: 

• Blade 2.63" (66.8mm)
• Handle 3.58" (90.9mm)
• Overall open 6.00" (152.4mm)

Number in Edition: 18

The Gentac ‘Midland’ features a beautiful frame in etched 'Mind Melt' damascus by Chad Nichols, inlaid with carbon fiber. The blade is hand-forged 'Boomerang' damascus by Chad Nichols; the one-hand button lock and the thumb stud are set with red topaz.

Materials

• Hand-forged damascus
• Carbon Fiber
• Blazing Red Topaz

Features & Specs

One-hand button lock system

Dimensions: 

Blade 3.25" (82.5mm)
Handle 3.80" (96.5mm)
Overall open 7.00" (177.8mm)

All William Henry knives feature a unique serial number which is engraved into the blade to assure the authenticity and lifetime traceability of the product

This knife is shipped in an elegant wood presentation box, and it comes with a pocket clipcase made from soft, high-grade leather, with an integrated stainless steel pocket clip

Number in Edition: 250

The Persian 'Crest' features a beautiful frame in hand-forged and heat-blued 'Rolling Rock' damascus by Chad Nichols, inlaid with 100,000 year-old fossil coral. The blade is 'Wave' damascus with an extra-strong core in ZDP-189. The one-hand button lock and the thumb stud are set with sapphires.

Materials

• Wave Damascus
• Hand-forged damascus
• Heat-colored damascus
• Fossil Coral
• Sapphire

Features & Specs

• One-hand button lock system
• Leather carrying case
• Shipped in an elegant wood presentation box
• Dimensions: 

Blade 2.50" (63.5mm)
Handle 3.13" (79.5mm)
Overall open 5.60" (142mm)

Number in Edition: 5

The 'Mesa' conjures visions of the Arizona desert, home of the beautiful ironwood scales on this fine cigar cutter. The thru hole in the titanium frame will accommodate up to a 52 gauge cigar, and the single sided precision ground damascus blade cuts cleanly thru your preferred smoke.  The damascus is our stainless 'Meadows' pattern by Chad Nichols featuring three alloys forged together into a tapestry in steel with an optimum hardness of HRC 59 for wear resistance.  Inlayed Arizona Ironwood is hand-polished to fine luster, and citrine gemstones, titanium, stainless, and sterling hardware complete the presentation.

Materials

• Citrine
• Desert Ironwood
• Hand-forged damascus
• Titanium

Features & Specs

Dimensions:

Blade: 2.75"

Handle: 3.75"

Open: 6.5

Number in Edition: 500

The Lancet 'Arctic' features a beautiful frame in hand-forged Mokume Gane by Mike Sakmar, inlaid with a stunning piece of 10,000 year-old fossil Woolly Mammoth bone. The blade is hand-forged 'Raindrop' damascus by Mike Norris. The one-hand button lock and the thumb stud are set with smoky quartz gemstones.

Materials

• Hand-forged damascus
• Mokume gane
• Fossil Mammoth Bone
• Smoky Quartz

Features & Specs

• One-hand button lock system
• Leather carrying case
• Shipped in an elegant wood presentation box
• Dimensions: 

Blade 2.75" (69.9mm)
Handle 3.63" (92.2mm)
Overall open 6.38" (162mm)

Number in Edition: 25

The 'Techno' is without equal in the world of exotic cigar cutters.  The thru hole in the titanium frame will accommodate up to a 52 gauge cigar, and the single sided precision ground damascus blade cuts cleanly thru your preferred smoke.  The damascus is our stainless 'Intrepid' pattern by Chad Nichols, featuring three alloys forged together into a tapestry in steel with an optimum hardness of HRC 59 for wear resistance.  Inlayed carbon fiber is hand-polished to fine luster, with spinel gemstones, titanium, stainless, and sterling hardware completing the presentation.  This piece works beautifully as a cigar cutter and general purpose pocket knife!

Materials

• Carbon Fiber
• Hand-forged damascus
• Spinel
• Titanium

Features & Specs

Dimensions:

Blade: 2.75"

Handle: 3.75"

Open: 6.5

Number in Edition: 500

The Lancet 'Joey Pants' is a special edition created in collaboration with actor/director Joe Pantoliano. This knife features a beautiful frame in heat-blued damascus by Larry Donnelly, inlaid with mother of pearl. The blade - also the work of Larry Donnelly - is heat-blued carbon damascus; the one-hand button lock and the thumb stud are set with sapphires.

Materials

• Hand-forged damascus
• Mother of Pearl
• Sapphire

Features & Specs

• One-hand button lock system
• Leather carrying case
• Shipped in an elegant wood presentation box
• Dimensions: 

Blade 2.75" (69.9mm)
Handle 3.63" (92.2mm)
Overall open 6.38" (162mm)

Number in Edition: 100

The Monarch 'Ikaika' features a beautiful frame in hand-forged 'Rolling Rock' damascus steel inlaid with Curly Koa wood. The blade is in William Henry's signature 'copper wave' damascus steel with an extra sharp core in VG-5 steel. The one-hand button lock and the thumb stud are set with Peridot. The Monarch is a simple design that is easy on the eye and effortless in the hand. The 'Ikaika' features some of William Henry's signature forged metals, and represents the perfect synthesis between elegance, function, modern and exotic materials.

Materials

• Copper Wave damascus
• Hand-forged damascus
• Curly Koa
• Peridot

Features & Specs

One-hand button lock system
Leather carrying case
Shipped in an elegant wood presentation box

Dimensions: 

• Blade 2.63" (66.8mm)
• Handle 3.58" (90.9mm)
• Overall open 6.00" (152.4mm)

Number in Edition: 15

The Gentac ‘Longhorn’ features a light and resilient frame in aerospace grade titanium, inlaid with beautiful hand-carved sterling silver scale. The blade is hand-forged 'Hornet's Nest' damascus by Mike Norris; the one-hand button lock and the thumb stud are set with spessartite; the lanyard bead is cast sterling silver.

Materials

• Hand-forged damascus
• Carved Sterling Silver
• Titanium
• Spessartite

Features & Specs

One-hand button lock system

Dimensions: 

Blade 3.25" (82.5mm)
Handle 3.80" (96.5mm)
Overall open 7.00" (177.8mm)

All William Henry knives feature a unique serial number which is engraved into the blade to assure the authenticity and lifetime traceability of the product

This knife is shipped in an elegant wood presentation box, and it comes with a pocket clipcase made from soft, high-grade leather, with an integrated stainless steel pocket clip

Number in Edition: 250

The Lancet 'Estuary' features a beautiful frame in etched 'X-Out damascus by Chad Nichols, inlaid with hand-carved mother of pearl. The blade is also 'X-Out' damascus by chad Nichols; the one-hand button lock and the thumb stud are set with mother of pearl.

Materials

• Hand-forged damascus
• Carved Mother of Pearl
• Mother of Pearl

Features & Specs

• One-hand button lock system
• Leather carrying case
• Shipped in an elegant wood presentation box
• Dimensions: 

Blade 2.75" (69.9mm)
Handle 3.63" (92.2mm)
Overall open 6.38" (162mm)

Number in Edition: 25

The Monarch 'Palm Springs'' features a beautiful bolster in 24K gold & Sterling silver koftgari; the scale is made from black palm wood, and the blade is hand-forged 'Typhoon' damascus by Rob Thomas; the one-hand button lock and the thumb stud are set with rubies.

Materials

• Hand-forged damascus
• Black Palm
• Ruby

Features & Specs

One-hand button lock system
Leather carrying case
Shipped in an elegant wood presentation box

Dimensions: 

• Blade 2.63" (66.8mm)
• Handle 3.58" (90.9mm)
• Overall open 6.00" (152.4mm)

Number in Edition: 50

The Kestrel 'Mesa' features a beautiful frame in 'Twist' mokume by Mike Sakmar, inlaid with a mesmerizing piece of zinc-matrix turqoise. The blade is Hand-forged 'Hornets Nest' damascus by Mike Norris; the one-hand button lock and the thumb stud are set with white topaz.

Materials

• Hand-forged damascus
• Mokume gane
• White Topaz
• Zinc Matrix turquoise

Features & Specs

• One-hand button lock system
• Leather carrying case
• Shipped in an elegant wood presentation box
• Dimensions: 

Blade 2.13" (54.1mm)
Handle 2.88" (73.1mm)
Overall open 5.00" (127mm)

Number in Edition: 25

The Kestrel 'Coral Wave' features a beautiful frame in hand-carved sterling silver, inlaid with zinc-matrix apple coral. The blade is hand-forged 'Boomerang' damascus by Chad Nichols; the one-hand button lock and the thumb stud are set with white topaz gemstones.

Materials

• Hand-forged damascus
• Carved Sterling Silver
• Zinc Matrix apple coral
• White Topaz

Features & Specs

• One-hand button lock system
• Leather carrying case
• Shipped in an elegant wood presentation box
• Dimensions: 

Blade 2.13" (54.1mm)
Handle 2.88" (73.1mm)
Overall open 5.00" (127mm)

Number in Edition: 50

The Kestrel 'Twenty-Five IX' features a beautiful frame adorned in sterling silver granulated beads, a traditional smithing technique known as 'Jawan', which was used in several of William Henry's early knife designs, and has not been featured in our collection for over 20 years.The blade is hand-forged 'Raindrop' damascus by Mike Norris; the one-hand button lock and the thumb stud are set with iolite gemstones.

Materials

• Hand-forged damascus
• Iolite

Features & Specs

• One-hand button lock system
• Sharkskin leather carrying case
• Shipped in an elegant wood presentation box
• Dimensions: 

Blade 2.13" (54.1mm)
Handle 2.88" (73.1mm)
Overall open 5.00" (127mm)

Number in Edition: 25

The 'Pinot' belongs equally on your neck as a pendant, in your pocket as a keychain knife, or in a museum. Blade is hand-forged 'Intrepid' damascus steel by Chad Nichols, and the handle is crafted from hand-forged & etched 'Twist' damascus steel, inlaid with wood from the original Eyrie pinot noir wood (the same vine that fathered the award-winning 'South Block' pinot noir of 1975). White topaz gemstone on 22" black box chain.

Materials

• Etched damascus
• Eyrie Vineyard pinot vine
• Hand-forged damascus
• White Topaz

Features & Specs

 

 

• Safe button lock system
• Dimensions: 

Blade 1.60" (40.64mm)
Handle 2.25" (56.0mm)
Overall open 3.80" (96.52mm)

Number in Edition: 100

The Pikatti 'Pinot Gem' folding knife features a frame in 24K gold Koftgari inlaid with dyed Eyrie Vinyards Pinot Noir vine wood. The blade is hand-forged 'Raindrop' damascus by Mike Norris. The button lock and thumb stud are set with rubies.  Timmreck & McNicol Exclusive

Materials

• Eyrie Vineyard pinot vine
• Hand-forged damascus
• Koftgari
• Ruby

Features & Specs

• One-hand button lock system
• Leather carrying case
• Shipped in an elegant wood presentation box
• Dimensions: 

Blade 2.00" (50.8mm)
Handle 2.63" (66.8mm)
Overall open 4.63" (117.6mm)

Number in Edition: 50

The Lancet 'Gray Dawn' features a beautiful frame in etched 'Brain Wave' damascus by Chad Nichols, inlaid with 10,000 year-old fossil walrus ivory. The blade is back tungsten DLC-coated ZDP-189 'Wave' damascus steel; the one-hand button lock and the thumb stud are set with rubies.

Materials

• Hand-forged damascus
• Fossil Walrus tusk
• Ruby

Features & Specs

• One-hand button lock system
• Leather carrying case
• Shipped in an elegant wood presentation box
• Dimensions: 

Blade 2.75" (69.9mm)
Handle 3.63" (92.2mm)
Overall open 6.38" (162mm)

Number in Edition: 25

The Kestrel 'Durango' features a beautiful frame in 'Twist' mokume by Mike Sakmar, inlaid with a mesmerizing piece of zinc-matrix turqoise. The blade is Hand-forged 'Intrepid' damascus by Chad Nichols; the one-hand button lock and the thumb stud are set with white topaz.

Materials

• Hand-forged damascus
• Mokume gane
• White Topaz
• Zinc Matrix turquoise

Features & Specs

• One-hand button lock system
• Leather carrying case
• Shipped in an elegant wood presentation box
• Dimensions: 

Blade 2.13" (54.1mm)
Handle 2.88" (73.1mm)
Overall open 5.00" (127mm)

Number in Edition:

The Persian 'Gold Valley' features a beautiful frame in 24K gold koftgari, inlaid with a piece of snakewood. The blade is hand-forged 'Typhoon'' damascus steel by Devin Thomas. The one-hand button lock and the thumb stud are set with white topaz.

Materials

• Hand-forged damascus
• Koftgari
• Snakewood
• White Topaz

Features & Specs

• One-hand button lock system
• Leather carrying case
• Shipped in an elegant wood presentation box
• Dimensions: 

Blade 2.50" (63.5mm)
Handle 3.13" (79.5mm)
Overall open 5.60" (142mm)

Number in Edition: 50

The Lancet 'Lineage' features a beautiful frame in etched 'Croc Skin' damascus by Chad Nichols, inlaid with a piece of 10,000 year old fossil mammoth bone. The blade is hand-forged 'Hornets Nest' damascus by Mike Norris; the one-hand button lock and the thumb stud are set with sapphires.

Materials

• Hornet's Nest damascus
• Hand-forged damascus
• Fossil Mammoth Bone
• Sapphire

Features & Specs

Number in Edition: 25

The 'Noir' features a beautiful frame in hand-forged, heat-blued 'Rolling Rock' damascus by Chad Nichols, inlaid with wood from the original Eyrie pinot noir vine (the same vine that fathered the award-winning 'South Block' pinot noir of 1975). The blade is 'Wave' damascus steel with an extra strong core in ZDP-189; the one-hand button lock and the thumb stud are set with blazing red topaz gemstones.

Materials

• Wave Damascus
• Hand-forged damascus
• Heat-colored damascus
• Eyrie Vineyard pinot vine
• Blazing Red Topaz

Features & Specs

One-hand button lock system
Leather carrying case
Shipped in an elegant wood presentation box

Dimensions: 

• Blade 2.63" (66.8mm)
• Handle 3.58" (90.9mm)
• Overall open 6.00" (152.4mm)

Number in Edition: 5

The Kestrel 'Silverwood' features a beautiful frame in hand-carved sterling silver, inlaid with amboyna burl wood. The blade is hand-forged 'Raindrop' damascus by Mike Norris; the one-hand button lock and the thumb stud are set with sapphires.

Materials

• Hand-forged damascus
• Carved Sterling Silver
• Amboyna Burl
• Amethyst

Features & Specs

• One-hand button lock system
• Leather carrying case
• Shipped in an elegant wood presentation box
• Dimensions: 

Blade 2.13" (54.1mm)
Handle 2.88" (73.1mm)
Overall open 5.00" (127mm)

Number in Edition: 25

The Lancet 'Red Springs' features an elaborate frame in hand-carved sterling silver with inset colored sapphire, and inlaid with a beautiful piece desert ironwood (one of the hardest woods on Earth). The blade is hand-forged 'Typhoon' damascus by Rob Thomas; the one-hand button lock and the thumb stud are set with sapphires.

Materials

• Hand-forged damascus
• Carved Sterling Silver
• Desert Ironwood
• Inset colored sapphires
• Sapphire

Features & Specs

• One-hand button lock system
• Leather carrying case
• Shipped in an elegant wood presentation box
• Dimensions: 

Blade 2.75" (69.9mm)
Handle 3.63" (92.2mm)
Overall open 6.38" (162mm)

Number in Edition: 100

The Mammoth Fairway is a beautiful, fully automatic golf tool featuring a frame in etched 'ladder' damascus by Mike Norris, inlaid with a mesmerizing piece of 10,000 year-old fossil Woolly Mammoth tooth. The automatic button lock is set with diamond.

Materials

• Hand-forged damascus
• Fossil Mammoth tooth
• Diamond

Features & Specs

• Fully Automatic with automatic button lock
• Magnetic PGA regulation size ball marker
• Leather carrying case
• Shipped in an elegant wood presentation box

Number in Edition: 250

The William Henry ‘Gris’ is a double hinged sommelier’s corkscrew featuring a Damascus steel frame, lever, and foil cutter. This fine statement piece also features a stunning white pearl inlay, and file work along the entire spine to showcase the attention to detail that we are known for.

Materials

• Hand-forged damascus
• Mother of Pearl

Features & Specs

Number in Edition:

The Lancet 'Bison' features a beautiful hand-forged frame of 'Twist' damascus by Chad Nichols, inlaid with fossilized bison bone. The blade is hand-forged 'Boomerang' damascus by Chad Nichols; the button lock and thumb stud are set with white topaz gemstones.

Materials

• Hand-forged damascus
• Etched damascus
• Fossil Bison bone
• White Topaz

Features & Specs

• One-hand button lock system
• Leather carrying case
• Shipped in an elegant wood presentation box
• Dimensions: 

Blade 2.75" (69.9mm)
Handle 3.63" (92.2mm)
Overall open 6.38" (162mm)

Number in Edition: 25

The Monarch 'Blue Beard' folding knife features a frame in 24K gold Koftgari (the ancient Indian technique of inlaying gold and/or sterling silver in tool-steel), inlaid with blue poplar burl wood. The blade is hand-forged 'Boomerang' damascus by Chad Nichols. The one-hand button lock and the thumb stud are set with spinel gemstones.

Materials

• Hand-forged damascus
• Koftgari
• Maple Burl wood
• Poplar Burl
• Spinel

Features & Specs

One-hand button lock system
Leather carrying case
Shipped in an elegant wood presentation box

Dimensions: 

• Blade 2.63" (66.8mm)
• Handle 3.58" (90.9mm)
• Overall open 6.00" (152.4mm)

Number in Edition: 10

The Kestrel 'Time Passages' features a beautiful frame in hand-carved sterling silver with inlaid watch gears by Lee Downey.  The blade is hand-forged 'Hornets Nest' damascus by Mike Norris; the one-hand button lock and the thumb stud are set with smoky quartz gemstones.

Materials

• Carved Sterling Silver
• Hand-forged damascus
• Smoky Quartz

Features & Specs

• One-hand button lock system
• Dimensions: 

Blade 2.13" (54.1mm)
Handle 2.88" (73.1mm)
Overall open 5.00" (127mm)

All William Henry knives feature a unique serial number which is engraved into the blade to assure the authenticity and lifetime traceability of the product.
This knife is shipped in an elegant wood presentation box, and it includes a pocket clipcase made from soft, high-grade leather, with an integrated stainless steel pocket clip

 

Number in Edition: 10

The Kestrel 'Blue Wave' features a beautiful frame in hand-carved sterling silver, inlaid with zinc-matrix Kingman turquoise. The blade is hand-forged 'Intrepid' damascus by Chad Nichols; the one-hand button lock and the thumb stud are set with white topaz gemstones.

Materials

• Hand-forged damascus
• Carved Sterling Silver
• Zinc Matrix turquoise
• White Topaz

Features & Specs

• One-hand button lock system
• Leather carrying case
• Shipped in an elegant wood presentation box
• Dimensions: 

Blade 2.13" (54.1mm)
Handle 2.88" (73.1mm)
Overall open 5.00" (127mm)

Number in Edition: 50

The Monarch 'Sawtelle' features a mesmerizing frame in 24K gold Koftgari (the ancient Indian technique of inlaying gold and/or sterling silver in tool-steel). The beautiful scale is in extra hard Desert Ironwood. The blade is hand-forged 'raindrop' damascus steel. The one-hand button lock and the thumb stud are set with citrines.

Materials

• Hand-forged damascus
• Desert Ironwood
• Citrine

Features & Specs

One-hand button lock system
Leather carrying case
Shipped in an elegant wood presentation box

Dimensions: 

• Blade 2.63" (66.8mm)
• Handle 3.58" (90.9mm)
• Overall open 6.00" (152.4mm)

Number in Edition: 100

The Monarch 'Desert Flower' features a mesmerizing bolster in 24K gold Koftgari, inlaid with desert ironwood. The blade is hand-forged 'Calypso' damascus by Chad Nichols; the one-hand button lock and the thumb stud are set with spessartite.

Materials

• Hand-forged damascus
• Koftgari
• Desert Ironwood
• Spessartite

Features & Specs

One-hand button lock system
Leather carrying case
Shipped in an elegant wood presentation box

Dimensions: 

• Blade 2.63" (66.8mm)
• Handle 3.58" (90.9mm)
• Overall open 6.00" (152.4mm)

Number in Edition: 100

The Persian 'Cairo' features a beautiful frame in 24K gold & sterling silver koftgari (the ancient Indian art of inlaying gold and/or silver in tool steel), inlaid with a piece of 10,000 year-old fossil walrus ivory. The blade is hand-forged 'Byzantine' damascus steel by Larry Donnelly. The one-hand button lock and the thumb stud are set with sapphires.

Materials

• Hand-forged damascus
• Fossil Walrus tusk
• Sapphire

Features & Specs

• One-hand button lock system
• Leather carrying case
• Shipped in an elegant wood presentation box
• Dimensions: 

Blade 2.50" (63.5mm)
Handle 3.13" (79.5mm)
Overall open 5.60" (142mm)

Number in Edition: 25

The Monarch 'Buchanan' features a beautiful frame in 24K gold koftgari, inlaid with snakewood. The blade is hand-forged 'Typhoon' damascus by Rob Thomas; the one-hand button lock and the thumb stud are set with white topaz.

Materials

• Hand-forged damascus
• Koftgari
• Snakewood
• White Topaz

Features & Specs

One-hand button lock system
Leather carrying case
Shipped in an elegant wood presentation box

Dimensions: 

• Blade 2.63" (66.8mm)
• Handle 3.58" (90.9mm)
• Overall open 6.00" (152.4mm)

Number in Edition: 50

The Gentac ‘Charleston' features a durable titanium frame inlaid with fossil brain coral. The blade is William Henry's 'Wave' damascus with VG-10 core; the one-hand button lock and the thumb stud are set with London Blue topaz gemstones.  

Southeast Wildlife Expo Exclusive

Materials

• Blue Topaz
• Fossil Coral
• Hand-forged damascus
• Titanium
• Wave Damascus

Features & Specs

One-hand button lock system

Dimensions: 

Blade 3.25" (82.5mm)
Handle 3.80" (96.5mm)
Overall open 7.00" (177.8mm)

 

 

Number in Edition: 25

The Kestrel 'Curio' features a beautiful frame in 'Twist' mokume gane by Mike Sakmar, inlaid with 10,000 year-old Woolly Mammoth bone. The blade is hand-forged 'Boomerang' damascus by Chad Nichols; the one-hand button lock and the thumb stud are set with smoky quartz gemstones.

Materials

• Fossil Mammoth Bone
• Hand-forged damascus
• Mokume gane
• Smoky Quartz

Features & Specs

• One-hand button lock system
• Leather carrying case
• Shipped in an elegant wood presentation box
• Dimensions: 

Blade 2.13" (54.1mm)
Handle 2.88" (73.1mm)
Overall open 5.00" (127mm)

Number in Edition: 25

The Kestrel 'Cloudcrest' features a beautiful bolster in heat-blued damascus by Larry Donnelly, inlaid with 10,000 year-old fossil walrus ivory. The blade is hand-forged 'Hornets Nest' damascus by Mike Norris; the one-hand button lock and the thumb stud are set with citrines.

Materials

• Hand-forged damascus
• Heat-colored damascus
• Fossil Walrus tusk
• Citrine

Features & Specs

• One-hand button lock system
• Leather carrying case
• Shipped in an elegant wood presentation box
• Dimensions: 

Blade 2.13" (54.1mm)
Handle 2.88" (73.1mm)
Overall open 5.00" (127mm)

Number in Edition: 25

The Gentac ‘Appaloosa’ features a beautiful frame in hand-forged, etched 'Brain Wave' damascus by Chad Nichols, inlaid with amboyna burl wood. The blade is hand-forged 'Dot Matrix' damascus by Rob Thomas; the one-hand button lock and the thumb stud are set with citrines.

Materials

• Hand-forged damascus
• Etched damascus
• Amboyna Burl
• Citrine

Features & Specs

• One-hand button lock system
• Leather carrying case
• Shipped in an elegant wood presentation box
• Dimensions: 

Blade 3.25" (82.5mm)
Handle 3.80" (96.5mm)
Overall open 7.00" (177.8mm)

Number in Edition: 25

The Monarch 'Red Butte' features a precious frame in 24K gold and sterling silver koftgari, inlaid with a beautiful scale of cocobolo wood. The blade is hand-forged 'Raindrop' damascus by Mike Norris. The one-hand button lock and the thumb stud are set with white topaz.

Materials

• Hand-forged damascus
• Cocobolo
• White Topaz

Features & Specs

One-hand button lock system
Leather carrying case
Shipped in an elegant wood presentation box

Dimensions: 

• Blade 2.63" (66.8mm)
• Handle 3.58" (90.9mm)
• Overall open 6.00" (152.4mm)

Number in Edition: 50

The Monarch 'Classic' features a beautiful frame in 'Twist' Mokume Gane by Mike Sakmar, inlaid with carbon fiber scales; the blade is hand-forged 'Boomerang' damascus by Chad Nichols; the one-hand button lock and the thumb stud are set with black onyx gemstones.

Materials

• Black Onyx
• Carbon Fiber
• Hand-forged damascus
• Mokume gane

Features & Specs

One-hand button lock system
Leather carrying case
Shipped in an elegant wood presentation box

Dimensions: 

• Blade 2.63" (66.8mm)
• Handle 3.58" (90.9mm)
• Overall open 6.00" (152.4mm)

Number in Edition: 250

The Monarch 'Dark Fire' features a light and resilient frame which is machined from aerospace grade titanium, then finished with a fine blast-polishing. The unique inlay is crafted from heat-colored 'Wave Mokume'. The blade is hand-forged 'Intrepid' damascus steel by Chad Nichols. The one-hand button lock and the thumb stud are set with London blue topaz gemstones.

Materials

• Hand-forged damascus
• Titanium

Features & Specs

One-hand button lock system
Leather carrying case
Shipped in an elegant wood presentation box

Dimensions: 

• Blade 2.63" (66.8mm)
• Handle 3.58" (90.9mm)
• Overall open 6.00" (152.4mm)

Number in Edition: 250

The Ventana ‘Cave Creek’ features a beautiful frame in Mike Sakmar's 'Raindrop' Mokume Gane (the ancient forging technique once used to decorate the hilts of Samurai swords), inlaid with 'Zinc Matrix' turquoise from the ancient Indian mine in Kingman, Arizona. The blade is hand-forged 'Typhoon' damascus by Rob Thomas; the button lock is set with a white topaz gemstone.

The 'Cave Creek’ is engraved with a serial number on the blade and a limited edition number on the leading edge of the handle (to assure authenticity and lifetime traceability). This knife is a perfect synthesis of artistry, function, rare and exotic materials; a distinctive personality statement to be worn and used for a lifetime.

The Ventana knife collection is our homage to the classic gentlemen’s pocket knives of a bygone era. The picture-window cutouts in the frame reveal the rare and exotic inlays that are one of the hallmarks of William Henry’s collections.

Materials

• Hand-forged damascus
• Mokume gane
• Zinc Matrix turquoise
• White Topaz

Features & Specs

• Two hand button lock
• Dimensions: 

Blade 2.50" (63.5mm)
Handle 3.13" (79.5mm)
Overall open 5.60" (142.2mm)

The Cave Creek includes a soft leather clip case for easy carry, and ships in an elegant wood presentation box

Number in Edition: 50